Hi there, new to the forum.
I am a bit embarassed to admit that I am a baquacil user, worked great the first year, nothing but problems so far this season.
I will be converting soon.
I have a 24 round above ground pool with a deep end (15000 gal ) , and have been fighting algae and cloudy water for the last three weeks. after spending $600 on baquacil products - and floc my water was about 90% clear this morning.
I took a sample to be tested that indicated TA - 0 after adding 25 lbs of alkalinity increase this week,
also my calcium hardness - 46 after adding 20 lbs of calcium hardness increaser this week, ph - 7.2
my pinpoint analysis recomended adding 26 lbs of alkalinity increase, and 25 lbs of calcium hardness increaser both divided into three applications.
So I did just that, and five minutes later I have a giant bowl of milk!
would have been nice if the pool store would have told me not to add these two chemicals on the same day!
So I guess my question is, does anybody have experience with this sort of thing, and how long does this ussually take to clear up?

Thanks for your help