Roger that. I did the calculation, and figured 1 litre of water to 0.01 ml of Flocculate. I did several test, including the one you mentioned with 3 gal :1 Teaspoon. I will see what it looks like tomorrow.

I added another 1.42 gallons of bleach, and swept the walls/floor. The murky white water turned to a brown green, you could see it boiling up at the end of each stroke with the broom across the bottom.

My Taylor 1000 kit came in, so I figured I would give it a try, and I am reading a more brighter yellow than the highest setting. This correlates to a more than 5 Cl and more than 10 Br. Also, on the pH, I read a darker purple than the highest setting. This correlates to more than an 8.2 pH. I would think that this is to high, and is wasting some of my Chlorine. What should I add to straight out the pH?

I was going to vacuum the bottom, but the connector that attaches the hose to the skimmer was not the right size. i will get the correct size and try again tomorrow.

I had already added the floc when I found that my Taylor 1000 came in. Hope I didnt wast 9.8 ounces of it.

What are your recommendations? I really appreciate you taking the time to help me out. I will subscribe and be a paying member. How do I do so?