I do have control of the operation, and we are working on getting plans of the pool. Most of what we know we learned in a twenty minute conference call yesterday.
The pool is 42 feet, 6 lanes.
Code Requirements:
Circulation is 6 hours, FC range is .25 to 5.0, with 1-3 ideal, pH range is 7.2 to 8, alk is 70-180, calcium we have to have a minimum of 150, but out fill water is about 120. CYA range is 20-100.
Our inspector uses a Palin Pool test, just like the one we own.
I will get the pool specs and drawings once Wyoming faxes them over.
Electrical power available is whatever is needed, we have two transformers near the pool, and our electrician is willing to wire what ever is needed.
As for a heater, what one would you recommend, our fill water will be about 46 degrees, and we plan on running the pool at 79 degrees. We have natural gas available at 3000 CFH.
Also, would it work to use regular cal-hypo in the pulsar, and supplement with a pulsar sunscreen? The reason I'm asking is that we already purchased 6,000 lbs cal-hypo briquettes, so that' not a problem.