+ Reply to Thread
Results 1 to 10 of 27

Thread: Electrical wiring concern with my PB

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    the woodlands, texas.
    Posts
    82

    Default Re: Electrical wiring concern with my PB

    Of this I can assure you.
    In my lifetime I've been involved in the construction of an easy 3000 plus swimming pools between being another mans hand, a mechanical subcontractor, and a general contractor.
    I've yet to see one power center (breaker box) where the sum of the individual breakers added up to an equal or less ampacity. The total of these breakers always exceeds the the main disconnect breaker.
    I agree with skamp. The thing to do is make a mental determination of what your big loads are and stay under that number while running your circuits.
    In the average home the items I mentioned are the high load circuits.

    Poolidiot is also absolutely correct in the fact that it can be overloaded.

    I have 200 amps to my pool/pavilion area with its own meter can and power service.
    I've tripped the main breaker twice since construction. It was the same thing both times. We had the band equipment set up and were jamming, had all 11 pumps running, and kicked on the heat pumps to help the gas fired heaters heat the spa quickly. The power tripped after 5 minutes give or take, the backyard went completely black and silent, the only light was from inside the house, from the fire in the fireplace out in the pavilion, and from the firepit flames by the beach.
    Now I run our band equipment off of a 50amp garage circuit. I just fed straight through it another 8/3 to a power center behind the pavilion. Now I can convert garage energy into backyard energy and not risk tripping the main.
    Although 200 amps is a bunch it can be as easily tripped by to much of a load as a 15 in a bathroom with teenage girls and hairdryers, LOL.

    See ya,
    Kelly

  2. #2
    skamp is offline Registered+ Thread Analyst skamp 0
    Join Date
    Aug 2006
    Location
    Cypress, TX
    Posts
    94

    Default Re: Electrical wiring concern with my PB

    Quote Originally Posted by huskyrider View Post
    Of this I can assure you.
    In my lifetime I've been involved in the construction of an easy 3000 plus swimming pools between being another mans hand, a mechanical subcontractor, and a general contractor.
    I've yet to see one power center (breaker box) where the sum of the individual breakers added up to an equal or less ampacity. The total of these breakers always exceeds the the main disconnect breaker.
    I agree with skamp. The thing to do is make a mental determination of what your big loads are and stay under that number while running your circuits.
    In the average home the items I mentioned are the high load circuits.

    Poolidiot is also absolutely correct in the fact that it can be overloaded.

    I have 200 amps to my pool/pavilion area with its own meter can and power service.
    I've tripped the main breaker twice since construction. It was the same thing both times. We had the band equipment set up and were jamming, had all 11 pumps running, and kicked on the heat pumps to help the gas fired heaters heat the spa quickly. The power tripped after 5 minutes give or take, the backyard went completely black and silent, the only light was from inside the house, from the fire in the fireplace out in the pavilion, and from the firepit flames by the beach.
    Now I run our band equipment off of a 50amp garage circuit. I just fed straight through it another 8/3 to a power center behind the pavilion. Now I can convert garage energy into backyard energy and not risk tripping the main.
    Although 200 amps is a bunch it can be as easily tripped by to much of a load as a 15 in a bathroom with teenage girls and hairdryers, LOL.

    See ya,
    Kelly
    Too funny. I have 1 girl now and one on the way so I will make sure to keep track of the hairdyers in the future so I don't trip the main!

    Steve

  3. #3
    Join Date
    Dec 1969
    Location
    the woodlands, texas.
    Posts
    82

    Default Re: Electrical wiring concern with my PB

    Quote Originally Posted by skamp View Post
    Too funny. I have 1 girl now and one on the way so I will make sure to keep track of the hairdyers in the future so I don't trip the main!

    Steve
    LMAO!!!

    As the father of many kids, and all but one being girls I'm rolling over laughing about the hairdryers. You have no idea how many times I've walked to our breaker box!!! The next time I build a new home I'll put in dual bathroom circuits or build a 5 bedroom with 5 bath home!!!

    Here's a link of what you can look forward to, LOL!!!

    http://ths.gardenweb.com/forums/load...534410339.html

    My son is now expecting a daughter in July of 07. Although I really envy you guys "I REALLY DON'T"

    See ya,
    Kelly

  4. #4
    skamp is offline Registered+ Thread Analyst skamp 0
    Join Date
    Aug 2006
    Location
    Cypress, TX
    Posts
    94

    Default Re: Electrical wiring concern with my PB

    Quote Originally Posted by huskyrider View Post
    LMAO!!!

    As the father of many kids, and all but one being girls I'm rolling over laughing about the hairdryers. You have no idea how many times I've walked to our breaker box!!! The next time I build a new home I'll put in dual bathroom circuits or build a 5 bedroom with 5 bath home!!!

    Here's a link of what you can look forward to, LOL!!!

    http://ths.gardenweb.com/forums/load...534410339.html

    My son is now expecting a daughter in July of 07. Although I really envy you guys "I REALLY DON'T"

    See ya,
    Kelly

    That looked like a great wedding. I attended a pool side wedding a few years back and it was really nice. Thanks for sharing the pictures!

    Steve

+ Reply to Thread

Similar Threads

  1. ADA compliant concern
    By Jimca in forum Commercial Pool Users, Managers & Workers
    Replies: 0
    Last Post: 02-12-2013, 07:30 PM
  2. Aqualink PDA-PS8 Wiring
    By VrRotate in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 04-20-2012, 02:37 PM
  3. Help - Need information for wiring for an AGP
    By hudson.bh in forum Above-Ground Pool Construction & Repair
    Replies: 13
    Last Post: 06-09-2010, 09:40 AM
  4. Wiring a timer
    By hhkont in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-02-2010, 08:40 AM
  5. Electrical SWG
    By Jeffery in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 05-05-2006, 05:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts