My CYA delivery method -don't laugh!

[waterbear]

So what do you know about a liquid CYA? That'd make life easier.

C.

The liquid CYA is from NaturalChemisty. It is the monosodium salt of CYA in solution. I have not been able to find out any info on it's pros and cons vs. cyanuric acid but I would assume that if it was better then evey product company would have it on the market. It is very hard to get any technical info from this company. I have tried and it took 5 emails until a question about their Metal Free, which uses EDTA instead of phosphonic acid was answered.

[brent.roberts]

Yeah, I hope it continues to go up. Bleachcalc says I need 4 lbs. I've only put half that in. The Autopilot system folks want a lot more than the 40PPM that I normally run. Going to re-test in a few days and see want really happened

[iwannapool]

The liquid CYA is from NaturalChemisty. It is the monosodium salt of CYA in solution. I have not been able to find out any info on it's pros and cons vs. cyanuric acid but I would assume that if it was better then evey product company would have it on the market. It is very hard to get any technical info from this company. I have tried and it took 5 emails until a question about their Metal Free, which uses EDTA instead of phosphonic acid was answered.

I've seen this selling for $23.99 a gallon and one gallon adds 40 ppm to 10,000gallons. I think I'll let the dry CYA just take its time to dissolve.