Polaris P935 nearly climbing out of my pool

[Rockman59]

I have a Pool Shark unit for cleaning. There should be an adjustment somewhere around where your pump/filter/heater equipment are located. There is a valve handle that controls how much water is fed into the cleaner and that determines how fast the cleaner moves around the pool and how high it will climb the sides of the pool.

[Big Splash]

I have a Pool Shark unit for cleaning. There should be an adjustment somewhere around where your pump/filter/heater equipment are located. There is a valve handle that controls how much water is fed into the cleaner and that determines how fast the cleaner moves around the pool and how high it will climb the sides of the pool.

The P935 is electric (AC converted to DC at the control panel). It doesn't operate off any pump water flow. It be nice if you could adjust the way rises out of the pool at the waterline. I wonder if it can be serviced to make such an adjustment?

It works well the way I'm using it now. I just don't have the time to take it back to the Fool Store (pool store) to get them to mess with. I'm guessing they'll say it works as advertised anyway...