+ Reply to Thread
Results 1 to 6 of 6

Thread: Cya 100 + ?????

Hybrid View

  1. #1
    Join Date
    Jul 2010
    Location
    Largo, Florida
    Posts
    509

    Default Re: Cya 100 + ?????

    You're going to want find out where your cya is really at. Since the test kit only goes to 100ppm, you can test above that by diluting your pool water sample 1-1 with distilled water. Run the test with the mixed sample and multiply your result by two. Do not use any more dichlor or trichlor tabs, that's where all the CYA is coming from. Plain unscented bleach (walmart usually has it for a good price), or liquid chlorine are what you need to be using at this point. With CH already at 170, I wouldn't use cal-hypo either.

    Once you know your real cya level you can run your pool based on the high CYA as macox126 mentioned. Your other option is to do partial drains and refills until your pool water is diluted sufficiently to get you to a more manageable CYA level.

    One thing to note, is that at CYA of 100 or more 4ppm fc is not effective at killing algae and you will get a green pool eventually. You need to keep the pool at at least 8ppm (somewhere between 8 and 15) and you'd have to take it up to 25ppm to "shock".
    Last edited by kelemvor; 08-09-2012 at 08:55 AM.
    rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Cya 100 + ?????

    Quote Originally Posted by kelemvor View Post
    One thing to note, is that at CYA of 100 or more 4ppm fc is not effective at killing algae and you will get a green pool eventually. You need to keep the pool at at least 8ppm (somewhere between 8 and 15) and you'd have to take it up to 25ppm to "shock".
    The Best Guess chart page explains this.

    Also, with a PF:7, your pool's FC (free chlorine) will be increased by 7 for each pound of chlorine gas equivalent added -- 1 gallon of 6% (chk %!) is about 0.5 lbs equiv, so will add about 3.5 ppm per gallon or 2.6 ppm per 96oz jug.

    With a CYA of ~120, a dose of 3 gallons (4 96oz) would be a good start, possibly followed by 1 96oz jug per day, till you hit 20 ppm. Then, back off and hold in the 12 - 15 ppm range.

    With CYA > 100 ppm, 20 ppm is NOT too high to swim. I've been running a large (>200,000 gallons) country club pool all summer at CYA in the 70 - 110 range (leaks a lot) and FC in the 8 - 20 ppm range . . . with NO complaints whatever.

    Thanks for the lifetime subscription!

  3. #3
    Join Date
    Aug 2012
    Location
    Indiana
    Posts
    4

    Default Re: Cya 100 + ?????

    Thanks to all for the help.
    14x30 oval 17.5K gal IG fiberglass pool; trichlor feeder; pentair clean and clear cc75 cartridge filter; pentair 1HP pump; 24hrs; taylor 6000; utility water; summer: none; winter: new pool; iPad; PF:6.9

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Cya 100 + ?????

    Just adding my thanks as well. A lifetime subscription is a big help to the forum! Hope you enjoy being a member!

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts