+ Reply to Thread
Results 1 to 10 of 74

Thread: First Time using Taylor HELP!!!!!!!!!!!!!!

Hybrid View

  1. #1
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    Sounds like that might do it for you, we'll know tomorrow afternoon when you test. I'm glad you're not dropping to 0.

    As you now have used about a pound of dichlor, your CYA should be over 10ppm moving you into the second band of Ben's Best Guess Chart and setting your new minimum FC target to 2ppm.

    Was the weather cloudy today? Is your pool in shade? It seems like a pretty low FC loss for ~10ppm CYA.
    Last edited by BigDave; 07-06-2012 at 05:42 PM. Reason: Sorry ma - you post faster than me.

  2. #2
    mroll is offline Subscriber Thread Analyst mroll 0
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    89

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    Quote Originally Posted by BigDave View Post
    Sounds like that might do it for you, we'll know tomorrow afternoon when you test. I'm glad you're not dropping to 0.

    As you now have used about a pound of dichlor, your CYA should be over 10ppm moving you into the second band of Ben's Best Guess Chart and setting your new minimum FC target to 2ppm.



    Was the weather cloudy today? Is your pool in shade? It seems like a pretty low FC loss for ~10ppm CYA.
    ACTUALLY HOT AND SUNNY TODAY...Pool in sun till about 6pm!! ummm maybe my CYA is higher but not registering yet???????????
    15' round 5.7K gal AG vinyl pool; Bleach; Haywood DE filter; Haywood 1 1/4 pump; 4-12 hrs; Taylor K-2006 Tester; utility water; summer: solar; winter: Not bought yet; ; PF:21??

  3. #3
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    How sure are you of that 1 lb value? If you're sure, I'm sure. Provided there is no other source of CYA.
    Let's just be sure we keep enough chlorine in the pool is little too much is fine, too little - highly ungood.
    Shock: When you have consistent CC above 0.5ppm or when you have algae, or when someone has an accident in the pool.

  4. #4
    mroll is offline Subscriber Thread Analyst mroll 0
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    89

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    Quote Originally Posted by BigDave View Post
    How sure are you of that 1 lb value? If you're sure, I'm sure. Provided there is no other source of CYA.
    Let's just be sure we keep enough chlorine in the pool is little too much is fine, too little - highly ungood.
    Shock: When you have consistent CC above 0.5ppm or when you have algae, or when someone has an accident in the pool.
    Ok I'm sure I added in about 18 ounces dichlor since filling pool. ALSO after filled added 1 gallon Shock from Leslies.. Bottle says Sodium Hyprochlorite 10% and 'other ingredients 90%..WHATS that about???
    Today tested 8 am with cheap tester TC 3+, tested again 2 pm with Taylor FC 2.5 CC less than .5..(Both times sunny)Will test again at 6. It is cloudy now.
    BTW...What is 'consistent" CC above .5...several days?
    Just want to get to point where I can use the beach.......
    THANKS SO VERY VERY MUCH
    15' round 5.7K gal AG vinyl pool; Bleach; Haywood DE filter; Haywood 1 1/4 pump; 4-12 hrs; Taylor K-2006 Tester; utility water; summer: solar; winter: Not bought yet; ; PF:21??

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    On the liquid chlorine, it is 10% sodium hypochlorite and the other 90% is probably water. Regular bleach is 6% sodium hypo and 94% water.

    When you do the CC (combine chlorine) test, ideally you want the result to be 0, but up to 0.5 is ok. When you have readings that are higher than that, it means you are fighting something in the water and thus the need to shock the pool.

  6. #6
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    10% sodium hypochlorite is just fine, it's strong bleach. Ultra bleach is usually about 6% sodium hypochlorite, there is some economy bleach that's 3% (it's usually not economical). Pool stores sell Liquid Chlorine / Liquid Shock at 10% sodium hypochlorite or 12.5% sodium hypochlorite. It's OK, the 90% is water and a little salt.

    FC of 2.5ppm is getting uncomfortably close to your target minimum of 2ppm. I would add chlorine if I got that close. How about we increase your dose to 4oz dichlor and see how we fare. Please put it in as soon as you can but wait to test until later.

    Yep, consistent - a couple days where you're reading CC at 0.5ppm or more. If you have CC in one test then gone the next it's not a concern.

    I'd be more comfortable if your FC was staying well above the minimum, let's dose a little more aggressively with 4oz at a time until that gets to be too much.
    Last edited by BigDave; 07-07-2012 at 04:14 PM. Reason: Mom's quicker than me again. I wouldn't last long in the old west.

  7. #7
    mroll is offline Subscriber Thread Analyst mroll 0
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    89

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    OK cheap tested at 6pm..Got 3..seems to be holding but put 3 ounces dichlor. Oops should of put in 4 as Dave suggested.
    Tested again now at 8pm..FC 5!!! CC .5....
    Will test twice tomorrow then increase to 4 ounces in you still think its necessary.
    I just want when I go on vacation in less than 2 weeks, my sons to be able to use a few cups of bleach each day and not worry about Taylor testing..sigh..................
    M
    15' round 5.7K gal AG vinyl pool; Bleach; Haywood DE filter; Haywood 1 1/4 pump; 4-12 hrs; Taylor K-2006 Tester; utility water; summer: solar; winter: Not bought yet; ; PF:21??

  8. #8
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    5ppm FC is fine, no need for "!!!". 5ppm is in your nomal range - a little overshoot is OK but hitting the minimum is cause for immediate action.

    No reason to sigh, we now know that you can maintain FC dosing only once daily. Your FC will last even longer after a few more days of dichlor. Do you think your sons will be able to do the OTO test daily?

+ Reply to Thread

Similar Threads

  1. Long Time Lurker, First Time Poster
    By MikeD in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 08-04-2012, 08:26 AM
  2. Long time reader, first time author
    By j_stewart89 in forum General Interest
    Replies: 1
    Last Post: 04-06-2012, 06:05 PM
  3. taylor- 2005 vs taylor-2006
    By axell in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 02-11-2012, 10:05 PM
  4. Just got my Taylor
    By Dooley11 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 08-03-2011, 11:03 PM
  5. taylor dpd #2
    By dhale63 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 05-11-2007, 12:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts