Results 1 to 10 of 74

Thread: First Time using Taylor HELP!!!!!!!!!!!!!!

Threaded View

  1. #6
    mroll is offline Subscriber Thread Analyst mroll 0
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    89

    Default Re: First Time using Taylor HELP!!!!!!!!!!!!!!

    Quote Originally Posted by Watermom View Post
    Since your CYA is low, go ahead and use your dichlor for awhile but monitor the CYA level. When it gets to 50, switch to bleach only.

    Wait a couple hours after you added the borax, retest and redose if needed. You can go ahead and add a little baking soda.

    Did you buy a K-2006 kit? If not, you really should. It will make your pool care much easier on you.

    Thanks for the subscription!
    YEP All these levels i got from the Taylor 2006..Will switch to the 10ml instead of 25 as you suggested...
    THANKS
    PH normal now..little more baking soda and TA should be too. Hey this isnt hard....
    Last edited by mroll; 06-28-2012 at 07:28 PM.

Similar Threads

  1. Long Time Lurker, First Time Poster
    By MikeD in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 08-04-2012, 08:26 AM
  2. Long time reader, first time author
    By j_stewart89 in forum General Interest
    Replies: 1
    Last Post: 04-06-2012, 06:05 PM
  3. taylor- 2005 vs taylor-2006
    By axell in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 02-11-2012, 10:05 PM
  4. Just got my Taylor
    By Dooley11 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 08-03-2011, 11:03 PM
  5. taylor dpd #2
    By dhale63 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 05-11-2007, 12:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts