+ Reply to Thread
Results 1 to 3 of 3

Thread: Time to replace the cell?

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    31

    Default Re: Time to replace the cell?

    I have the same setup as you, and my cell is ~5 years old. I noticed this year that I've had to add liquid chlorine to keep it above 3 ppm. Since I had very good luck with the cell, I'll probably get an exact replacement. Mine says on the side that they offer a $75 trade in for the old one, so I"m assuming that a new one costs just under $500?

  2. #2
    Join Date
    Dec 1969
    Location
    Oakland, CA
    Posts
    48

    Default Re: Time to replace the cell?

    Quote Originally Posted by Charlie View Post
    I have the same setup as you, and my cell is ~5 years old. I noticed this year that I've had to add liquid chlorine to keep it above 3 ppm. Since I had very good luck with the cell, I'll probably get an exact replacement. Mine says on the side that they offer a $75 trade in for the old one, so I"m assuming that a new one costs just under $500?
    Actually, I searched more carefully, and there are places that sell the original part for around $400, and in addition there is a $50 trade-in rebate, so I am leaning towards the original part now.
    30'x16' (irregular) indoor gunite/plaster pool, 10k gal,
    Autopilot DLG-220 with SC-48 cell, 3/4 HP recirc pump,
    solar panels, heat exchanger from 200 kBTU/hour Viessmann boiler

+ Reply to Thread

Similar Threads

  1. Should i replace my salt cell or the whole system
    By turk2012 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 24
    Last Post: 05-20-2015, 05:14 PM
  2. Time to replace the QuikChlor...
    By steveinaz in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-20-2011, 11:44 AM
  3. QuikChlor SWC...Replace cell or entire unit????
    By AZPOOLNEWB in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 05-25-2011, 12:02 PM
  4. Time to replace my liner?
    By mdenegre in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 11-14-2010, 10:39 AM
  5. Run time vs. Cell %
    By estermer in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 06-04-2006, 02:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts