I always add cya slowly directly into skimmer with pump basket removed. This seems to work fine. Any problems with this method that I am not aware of?
I always add cya slowly directly into skimmer with pump basket removed. This seems to work fine. Any problems with this method that I am not aware of?
I live in South Florida. I have owned my first pool for 6 years now. 12,200 gal. with exposed aggregate finish, spa with spill over, cartridge filter, pop up bottom cleaning jets, Chlorine by swg. I am eternally grateful for The Pool Forum!!
15'x30' Rectangle w/ ovals at ends 12.2K gal IG pool; Bleach now as SWCG died.; Hayward 1200 cartridge filter; Emerson 2HP pump; 6hrs; Taylor K-2006 La Motte Borate Test Strips; utility; summer: ; winter: ; iPad; PF:9.8
That's the method that I use, as well. Just make sure you're pouring it in at a slow enough rate that it doesn't clump up in the pipes before it gets to your filter.
also remember not to backwash your filter for a week or so after the CYA addition to keep from washing it right back out.
Janet
I just did this by taking the cya and a bucket of water and mixed until the water was thicker then added it through the slowly thorugh the skimmer. There was alot left in the bucket but I just repeated it until most was dissolved then I just scooped the rest in the skimmer slowly. I wish I would have read about the nylon first.![]()
What you did was fine. I have always added my cya directly to my skimmer and have never had a problem. Just remember not to backwash for a week or so or you will just backwash the cya right out.
Bookmarks