+ Reply to Thread
Results 1 to 10 of 16

Thread: Pentair IntellipH (pH controller) - any one use it?

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    Orlando, FL
    Posts
    29

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    That's interesting. My TA is at 50 now. I am raising to 80 with baking soda. I need to read through this forum to see what "maintaining borates" means. That is not something I currently check or am familiar with.
    Thanks.

  2. #2
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    Quote Originally Posted by CountryBumkin View Post
    That's interesting. My TA is at 50 now. I am raising to 80 with baking soda. I need to read through this forum to see what "maintaining borates" means. That is not something I currently check or am familiar with.
    Thanks.

    Maybe this will help

    http://www.poolforum.com/pf2/showthr...hlight=Borates

    In a nutshell, borates can help discourage algae, act as a pH buffer, and can make the water feel better. BTW, if you use straight boric acid (not borax), there's no need to add acid with it. This is what I do (can be ordered online).
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  3. #3
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    Yea. I added my borates with MA and borax. It was a pain to do. Jim's way is much easier!

    I would get the pH and TA where you want it and the. Go for it. PH and TA are much harder to adjust after the addition of borates.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  4. #4
    Join Date
    May 2012
    Location
    Orlando, FL
    Posts
    29

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    Thanks for the tip. I'm going to order the Borate test strips (linked to in the Borax thread), then I'll start the process.

    The Borax thread states that once the 50+ ppm level is reached, I should never have to add Borax again (it says the levels don't diminish over time).

    Have you found this to be the case (I lose water through evaporation and have an auto-filler on the pool). Even my CYA levels change over time (I suppose I should just use the test strips occasionally to monitor).

    My pool is somewhere between 15,000 and 20,000 gallons, so I would need 15 to 20 "4.5lb boxes" of Borax. That's 67-1/2 to 90 pounds of borax. Am I getting this right?

  5. #5
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    First, the borates will reduce like CYA, not like chlorine.

    Second, I found that the instructions way-overstated the amount of borax/acid needed. I stopped adding after about half of the recommended dosage.

    If you go the borax/MA route, buy half of what you think you will need. You can always buy more later.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  6. #6
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    Seriously, why go through all that trouble when adding boric acid is so easy?
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  7. #7
    Join Date
    May 2012
    Location
    Orlando, FL
    Posts
    29

    Default Re: Pentair IntellipH (pH controller) - any one use it?

    True. I read the part at the bottom of the Borate thread about using Boric Acid. The link is no longer working but I'm sure I can find this. Is there another name this stuff goes by (like the "20 Mule Team") I should be looking for in my local Walmart?

+ Reply to Thread

Similar Threads

  1. High Chlorine since adding IntelliPH to system
    By banjeman in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 05-27-2014, 08:15 PM
  2. Pentair Ph controller
    By Swimming Scorpion in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 04-12-2014, 11:47 PM
  3. Aqualink RS all controller
    By prbond in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-27-2012, 01:07 PM
  4. Which controller to get?
    By duksrule in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 10-28-2009, 09:48 AM
  5. Is the Pentair EasyTouch a good controller?
    By skamp in forum Pool Equipment & Operations
    Replies: 12
    Last Post: 05-18-2008, 09:29 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts