Yea. I added my borates with MA and borax. It was a pain to do. Jim's way is much easier!
I would get the pH and TA where you want it and the. Go for it. PH and TA are much harder to adjust after the addition of borates.
Yea. I added my borates with MA and borax. It was a pain to do. Jim's way is much easier!
I would get the pH and TA where you want it and the. Go for it. PH and TA are much harder to adjust after the addition of borates.
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Thanks for the tip. I'm going to order the Borate test strips (linked to in the Borax thread), then I'll start the process.
The Borax thread states that once the 50+ ppm level is reached, I should never have to add Borax again (it says the levels don't diminish over time).
Have you found this to be the case (I lose water through evaporation and have an auto-filler on the pool). Even my CYA levels change over time (I suppose I should just use the test strips occasionally to monitor).
My pool is somewhere between 15,000 and 20,000 gallons, so I would need 15 to 20 "4.5lb boxes" of Borax. That's 67-1/2 to 90 pounds of borax. Am I getting this right?
First, the borates will reduce like CYA, not like chlorine.
Second, I found that the instructions way-overstated the amount of borax/acid needed. I stopped adding after about half of the recommended dosage.
If you go the borax/MA route, buy half of what you think you will need. You can always buy more later.
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Seriously, why go through all that trouble when adding boric acid is so easy?
22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6
True. I read the part at the bottom of the Borate thread about using Boric Acid. The link is no longer working but I'm sure I can find this. Is there another name this stuff goes by (like the "20 Mule Team") I should be looking for in my local Walmart?
I found Boric Acid on Amazon (the pricing is all over the place) for a best price of $22.90 for 10LBS. I see that Boric Acid is used as ant/roach killer. Is this stuff all the same? Do I need to look for certain purity or anything. Is the bug killing Boric Acid the same as the pool use Boric Acid?
Thanks
This is what I use
http://www.chemistrystore.com/Chemicals_A-F-Boric.html
I buy the 55lb size.
Others on the forum have also recommended this
http://www.dudadiesel.com/search.php...FYhcfgod98oBrw
In a 20k gal pool with no borates it will take about 48lbs of boric acid to reach 50ppm.
22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6
Bookmarks