+ Reply to Thread
Results 1 to 7 of 7

Thread: High CYA and shock

Hybrid View

  1. #1
    Join Date
    Aug 2012
    Location
    Pennsylvania
    Posts
    16

    Default Re: High CYA and shock

    Charlie, it wouldn't surprise me.

    I wasn't surprised if it was copper, either, because we have had problems with copper in the water in the past, but drained 3/4 of the water and refilled. Can all the water chemistry being off bind up the copper and it's just going to show up later when the water is balanced maybe? I don't see any other color in the water right now, but maybe it's going to still.
    15x30 oval 9.2K* gal AG vinyl pool; Chlorinator ; DE filter; pump; hrs;utility water; summer: solar; winter: vinyl / water bags; ; PF:13

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: High CYA and shock

    Quote Originally Posted by Midnight View Post
    Can all the water chemistry being off bind up the copper and it's just going to show up later when the water is balanced maybe?
    Low pH can dissolve metals, which may then reappear as stains when the pH and alkalinity are increased. Adding HEDP prior to 're-balancing' can temporarily keep the metals in the soluble (non-staining, but also non-filtering-out) form. The CuLator bags can remove SLOWLY remove metals from pool water but ONLY when the metals are in the soluble form.

    If the metals are not actually removed from the water, they will began to reappear. Depending on a number of factors, metal can reappear as debris collected on the filter -- this is a highly desirable outcome. When HEDP is used, the filter should be run 24/7, so that as the HEDP breaks down and releases the metal, there is an improved chance that it will be caught as particles on the filter.

+ Reply to Thread

Similar Threads

  1. How to Shock a high ph Salt Pool with Bleach
    By AkronOhioPoolOwner in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 08-08-2011, 10:57 AM
  2. Newbie: To shock or not to shock... That is the question
    By KaseyNewman in forum Using Chlorine and Chlorinating Chemicals
    Replies: 10
    Last Post: 06-04-2011, 03:50 PM
  3. Replies: 4
    Last Post: 04-25-2011, 05:55 PM
  4. Added bleach to shock pool, now ph is too high
    By ginar in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 04-14-2011, 08:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts