Results 1 to 4 of 4

Thread: problem with Lamotte color-Q 7 pro test

Threaded View

  1. 07-06-2007 11:11 AM #1
    Amir
    Amir is offline Registered+ Thread Analyst Amir 0
    Join Date
    Dec 2004
    Location
    Potomac, MD, USA.
    Posts
    70

    Default problem with Lamotte color-Q 7 pro test

    Hi,
    I ordered the Lamotte color-q and used it last night. all worked fine and my numbers were
    30K gunite pool
    water temp 78
    PH 7.5
    ALK 67
    CH 220
    Free CL 5.1
    Total CL 5.16
    CYA 3!!

    I put in enough CYA to have a level of 30 on june 1st and have been using average of 2 3" pucks supplemented with bleach every week to sanitize. So I should have more than 3 ppm CYA ! Anyone with the same problem?
    Regards

    Amir
    Last edited by Amir; 07-06-2007 at 11:22 AM.
    Reply With Quote Reply With Quote
« Diluting issues | Harsh water?! »

Similar Threads

  1. LaMotte ColorQ Water Tester
    By donaldm823 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 42
    Last Post: 08-04-2007, 10:09 AM
  2. Hayward Color Logic Problem
    By tommy_b in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 05-11-2007, 02:08 PM
  3. strange test color
    By roxy in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 09-17-2006, 12:56 PM
  4. Borate test strip color confusion
    By atwetzel in forum Testing and Adjusting Pool Water Chemistry
    Replies: 5
    Last Post: 09-08-2006, 11:53 AM
  5. A test kit for the color blind?
    By famdog in forum Testing and Adjusting Pool Water Chemistry
    Replies: 5
    Last Post: 06-26-2006, 11:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules