+ Reply to Thread
Results 1 to 7 of 7

Thread: Liner slipping out of coping

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    38

    Default Re: Liner slipping out of coping

    Quote Originally Posted by matt4x4 View Post
    You can easily get the liner back in - esp. if it's a) only a year old and b) only 1/4 inch down.
    Use hot water to soften the liner so you can pull it back up into place and clip it in.
    I've seen people with 15 year old liners use this trick to get it back in place.
    I did the same on my 4-5 year old liner.
    You don't want to use boiling water, but it needs to be fairly hot. I used hot tap water then microwaved it a few seconds beyond that.
    Pour it on the section of the liner that you need to stretch back into place, pull it up and push it back into the track. You will be pulling hard and your fingers and thumbs will be sore by the time are you done.
    Pool discussion site - new users accepted - questions crossposted here upon request: []www.pooltalk.info[]

  2. #2
    Join Date
    May 2006
    Posts
    23

    Default Re: Liner slipping out of coping

    Quote Originally Posted by falken View Post
    I did the same on my 4-5 year old liner.
    You don't want to use boiling water, but it needs to be fairly hot. I used hot tap water then microwaved it a few seconds beyond that.
    Pour it on the section of the liner that you need to stretch back into place, pull it up and push it back into the track. You will be pulling hard and your fingers and thumbs will be sore by the time are you done.
    Well, you weren't kidding about my fingers being sore....and my arms, shoulders and patience were exhausted by the time I finished the first area! Now I am looking around the rest of the pool and noticing other small areas that look like they are starting to slip out so it looks like I will be working on this liner for a couple of weeks, one rail at a time. That's ok, I'm just glad that I can fix it!

    I did stick a bunch of pennies in the bead receiver to keep the liner from slipping out again in that area.....I don't want to have to re-do this again! I'll have to raid my penny jar and put a few hundred of them in as I go.

    Anyway, thanks to everyone for the advice, the hot water trick really works.

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    38

    Default Re: Liner slipping out of coping

    Quote Originally Posted by daisy11 View Post
    Anyway, thanks to everyone for the advice, the hot water trick really works.
    It also helps if you do it on a hot day while the sun is beating down on the section you need to fix. Glad it worked out for you! Don't hurt yourself too much!
    Pool discussion site - new users accepted - questions crossposted here upon request: []www.pooltalk.info[]

+ Reply to Thread

Similar Threads

  1. Replacing deck & coping on a vinyl liner pool
    By sampeterson18 in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 06-22-2014, 10:22 PM
  2. Coping Identification for Inground Vinyl Liner
    By 66Corvette in forum --cleanup--
    Replies: 0
    Last Post: 06-06-2013, 10:49 PM
  3. Liner slipping
    By bradatkins in forum Above-Ground Pool Construction & Repair
    Replies: 16
    Last Post: 08-26-2012, 09:56 PM
  4. Need to replace I/G liner and coping....
    By heatherc in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 07-10-2011, 01:02 PM
  5. Liner Slipping from Coping
    By nutmegax in forum In-Ground Pool Construction and Repair
    Replies: 6
    Last Post: 07-22-2006, 11:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts