+ Reply to Thread
Results 1 to 10 of 11

Thread: Oil sheen clean - looking for thoughts/ideas...

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    I must admit this is a new thing for me. How did you get the oil in your pool in the first place? How can you prevent it happening again?
    My parents once won a basket full of tennis balls, about 125 or 150 of them, in a raffle. We kids had tennis balls to lose in the woods for YEARS! And my mom got a really nice, big rattan laundry basket out of it!
    Carl

  2. #2
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Quote Originally Posted by CarlD View Post
    I must admit this is a new thing for me. How did you get the oil in your pool in the first place? How can you prevent it happening again?
    My parents once won a basket full of tennis balls, about 125 or 150 of them, in a raffle. We kids had tennis balls to lose in the woods for YEARS! And my mom got a really nice, big rattan laundry basket out of it!
    See this thread http://www.poolforum.com/pf2/showthr...784#post128784

    It's all gone now. The PigMat has also trapped some gunk too. I'm thinking I might run an experiment in my pool and put a tablespoon of vegetable oil on the surface and throw the PigMat near it to see how it does. My biggest problem is this - Extra Virgin Olive Oil or plain old canola oil? I have some Habanero-Lime infused olive oil as well but I'm afraid that might cause some eye irritation

    Actually, if anyone has any experience with those "enzyme" concoctions (FirstAid for Pools, etc), I'd love to hear any advice on those.
    16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Quote Originally Posted by CarlD View Post
    I must admit this is a new thing for me. How did you get the oil in your pool in the first place? How can you prevent it happening again?
    From what we've seen over the years, it comes from oiled sunbathers OR from swimmers using lotions PRIOR to swimming to avoid dry skin. Like pee, swimmer oils are easier to manage OUT fo the water than in it.

    One simple solution is to have a few microfiber towels on the deck for using in wiping off excess lotion, sunscreen, etc. BEFORE entering the pool.

    Sams Club has them for cheap; so does Amazon: AmazonBasics Microfiber Cleaning Cloth (Pack of 24)

  4. #4
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Quote Originally Posted by PoolDoc View Post
    From what we've seen over the years, it comes from oiled sunbathers OR from swimmers using lotions PRIOR to swimming to avoid dry skin. Like pee, swimmer oils are easier to manage OUT fo the water than in it.

    One simple solution is to have a few microfiber towels on the deck for using in wiping off excess lotion, sunscreen, etc. BEFORE entering the pool.

    Sams Club has them for cheap; so does Amazon: AmazonBasics Microfiber Cleaning Cloth (Pack of 24)
    I decided to go with PigMat #551 (there's also a white version as well) which is great because it is completely hydrophobic but sucks up oil (I've used them to catch oil spills during oil changes and they are awesome for that)..

    This particular Exxon Valdez slick was contractor-induced. I wish I had known before hand as I would have been more prepared. But, I totally agree about the likliest source being bather-induced. My brother and sister-in-law visited back in May and I swear that my SIL went through ten tubes of SPF-10,000 (the stuff was thicker than asphalt tar) all of which ended up on the surface of my pool. I was seriously considering throwing kitty litter in the water to absorb all that gunk Suffice it to say, my CC's were high and I finally had to shock chlorinate the pool to clear it all out.

    Next year, if she shows up, she's getting blasted with my 3100psi power washer if she steps within 10ft of my pool
    16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls

  5. #5
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Guess your SIL is a PITA...

    Still fascinated by how a contractor could dump so much oil in your pool. What did he do--change some small engine's crankcase oil over your pool?????
    Carl

  6. #6
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Haha. That is kinda gross. I use the tennis balls for the normal skimmer black-goo. Don't think I would intentionally put vegetable oil in my pool. Try it in a bucket if you must.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  7. #7
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Default Re: Oil sheen clean - looking for thoughts/ideas...

    Quote Originally Posted by CarlD View Post
    Guess your SIL is a PITA...

    Still fascinated by how a contractor could dump so much oil in your pool. What did he do--change some small engine's crankcase oil over your pool?????
    So the contractors post soda blasting clean up is to wash the blasting dust off with pool water and then, to avoid water stains, he wipes the tile down with a mixture of mineral oil, water and I'm guessing a little surfactant like automatic dishwasher liquid or some such thing. It cleans off the dust and water and leaves a nice shine on the tile surface. Since you lower the water below the tile line, you then fill it back up when he's done. For my pool, that means ~100 linear feet of tile half submerged under the water line. All that mineral oil now floats off tile and to the water's surface. More than enough to leave a nice little slick.

    Please don't get me wrong, I'm not mad or anything. I half expected as much. I just wish I had been more prepared for it. I would rather have absorbed most of it as opposed to letting the skimmer catch it and send it on to the filter. Chlorine has a way of reacting with oils that can make them turn gooey. It's probably all imbedded in my DE now so a good long filter backwash is in order. Actually, I have to do my annual filter tear-down anyway and clean off the cartridges inside. So I'm glad this all happened now as opposed to the beginning of the season.
    16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls

+ Reply to Thread

Similar Threads

  1. Pebble Sheen Color Upgrades and Pricing
    By dbrunetti in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 05-20-2012, 11:52 AM
  2. A few thoughts about CYA
    By gordyjamz in forum Using Chlorine and Chlorinating Chemicals
    Replies: 24
    Last Post: 07-31-2010, 06:56 PM
  3. Pebble Sheen ?
    By jrouse1 in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 01-13-2007, 08:37 AM
  4. Pebble Sheen "Cool Blue" Color
    By Poolboyz in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 07-12-2006, 07:24 PM
  5. Durazzo vs Pebble Sheen
    By desalvsj in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 06-11-2006, 11:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts