+ Reply to Thread
Results 1 to 10 of 19

Thread: My new house with a pool

Hybrid View

  1. #1
    Join Date
    Jun 2013
    Location
    Central Florida
    Posts
    154

    Default Re: My new house with a pool

    I think that if you want to compare your Taylor results to an accurate tester of another type, you would use the 25 ml sample. This will give you a CL(FL and CC) reading in 0.2 ppm increments. I don't' get your reported "1-2 CL, .5 - 1 CC.

    At any rate, how your FC reading looks depends ENTIRELY on your CYA. Post that reading
    In-ground gunite 16 x 30 13,000 gal. Full screen enclosure. 120 sq ft. Filter cartridge, 1-1/2 HP pump. Master Pools In-floor cleaner. Taylor K-2006.

  2. #2
    Join Date
    Apr 2014
    Location
    Las Vegas, NV
    Posts
    18

    Default Re: My new house with a pool

    Quote Originally Posted by nefretrameses View Post
    I think that if you want to compare your Taylor results to an accurate tester of another type, you would use the 25 ml sample. This will give you a CL(FL and CC) reading in 0.2 ppm increments. I don't' get your reported "1-2 CL, .5 - 1 CC.

    At any rate, how your FC reading looks depends ENTIRELY on your CYA. Post that reading
    The 1 - 2 Cl reading is based off the color chart in the Taylor test kits. The HACH spectrophotometer and the Ultrameter read down to .00 Also im not trying to be an ass, but read up on these testers then you will know more than you are commenting about. HACH D 2400 spectrophotometer and the Ultrameter II

    As for the CYA I dont have a kit that reads that yet. Hope to make it to the store in the next few days to get one.


    Taylor reads:
    .5 - 1
    1 - 2
    ect.....
    Plaster in-ground pool with spa; 2.5HP Whisperflow2 pump; Pentair CCP-420 filter; In-floor cleaning; Taylor K-1004

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts