You might be able to get a muffler shop to do it.
We had the pool professionally leveled and put 3 inch blocks under the u shaped legs. The mistake I made was not putting the blocks horizontal with the bottom of the "U"; instead I put them vertical so the blocks would be centered in the middle of the 'U'. We had torrential rains last night and the pool filled up and buckled 6 U shaped legs on one side. Intex says these legs are out of stock. Anyone ever straighted bent U shaped legs successfully? So frustrated with myself, the rain and the pool!!! Thanks in advance.
You might be able to get a muffler shop to do it.
PoolDoc / Ben
Hmm-mh. You could probably make new ones with 1 1/4" EMT and a bender:
http://constructionsupplycentral.com...t-conduit.html (But check Lowes & Home Depot)
Bender @ AmazonYou can buy a 1" and a 1.25" EMT coupling, to take home and compare to your tubing sizes. And, you can hire an electrician to fit the tubing, instead of DIY.
Handle @ Amazon
Cutter @ Amazon
Thanks for your responses. I really think there's no hope for these legs. By the time this posted as a new thread, I have found someone who is selling their old pool on Craig's list; so I may end up with some used legs. Still it will be 18 used legs for the price of 6 new legs and I can get them this week.
Sounds like a better solution, to me.
Bookmarks