I have an 1.25hp Aqua Pro variable speed pool pump with an Impower speed selection switch on it. the pump is about 5 years old and has worked fine until 2 days ago. When pushing pump switch the power light and high speed light comes on, no error light blinking. The motor/pump doesn't make any noise what so ever. I have power going to the switch but using a cheap multi meter I show no power after the switch, granted there are a lot of wires and I may not have hit the right combination. I checked the circuit board and nothing looks burnt or swollen. there is no reset button on the motor that I can find.

I would hate to replace the motor if its just a switch or board.

I would appreciate any information that I can get. Thank you