+ Reply to Thread
Results 1 to 8 of 8

Thread: Old Motor Seized Need New Pump

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Sunny, Florida.
    Posts
    9

    Default Re: Old Motor Seized Need New Pump

    I had no considered 2-speeds. Are there advantages to a VS pump vs 2-speed pump? Additional savings?

    What about the warranty for owner installed vs 'professional' ? In particular the Pentair is 60-days vs 1+ years?

    -d
    15K gal. IG Plaster // Mytilus FRP Pac-Fab C-7699 // 1.5" Piping // CENTURY 1.5 HP Motor 3450 RPM 230v (AO Smith) // DOB 1989 // Attached 'SPA' // inline Heat Pump (has not been used for 10 years) with Jandy Diverter Valves // County Water as needed but frequency filled by rain in summer

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Old Motor Seized Need New Pump

    The savings from a 2 speed pump is HUGE. In typical installations, on LO, the pump moves about 1/3 of the water with 1/10 of the electricity (3x increase in efficiency) Also, filters function better with LOW flow, than with HIGH.

    VS pumps save a little more, but are more expensive, more complex, and usually work best with electronic pool controls . . . which are ANOTHER point of failure. I'm not a huge fan, for simple pools.

+ Reply to Thread

Similar Threads

  1. Seized screw/bolt
    By rgshawlf in forum --cleanup--
    Replies: 0
    Last Post: 03-28-2017, 12:16 PM
  2. Replies: 2
    Last Post: 08-04-2013, 09:37 AM
  3. Replace motor or pump and motor?
    By myLABSpool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-25-2013, 01:13 PM
  4. One motor primes pump another motor wont????
    By jmurch in forum --cleanup--
    Replies: 1
    Last Post: 12-17-2012, 10:47 AM
  5. Replace motor or motor& pump?
    By jtcaputo in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 09-08-2012, 07:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts