Hi,

Thanks for all the info here!

I bought an Intex Easy Set 12 X 20 last spring and made out fine. I will spare you the sob story of how this year has went. I just bought an HTH 6 way kit and the results were ugly. Given my CYA reading was triple the recommended I decided to drain it and start fresh.

I already have 4 gallons of 6.00% bleach on hand and enough of the stabilizer linked below on to bring the CYA up to the proper level.

That brings me to my title question - do I still need to use Dichlor or can I use the bleach and stabilizer I already have?

Stabilizer (label says 100% CYA and no other ingredients are listed): https://www.walmart.com/ip/Clorox-Po...4-lbs/41466055


Thanks - Herb