Hello!

I’ve spent the last 12 hours working to try to get my IG pool square. This is a DIY 18 x 36 with 8ft deep end and polymer wall pool which will have a vinyl liner.

No matter what method we try we can’t seem to get it square. When we do get it square, the length of the pool is 2 inches too long, which makes no sense to us. And if we get the length correct the width becomes too long. I’ve had a general contractor and a carpenter working with me today. They’ve built several homes but this is a challenge and we can’t figure out why. The plan tomorrow weather permitting is to remove all the coping and a few of the walls and semi start over. If any of you guys have any advice or suggestions I’m all ears.

Thanks.