Re: Salt Water Stain Removal
"I was told by the company that installed my pool that the staining is from the small amount of impurities in the salt that gets released when running through the salt cell (there is a return in the steps; perhaps this is why it shows stains first?)."
This is not true or you would see it ALL the time. Do you have a gas heater? If it's metal staining, the metal has to come from somewhere. There's not enough metal in salt to cause staining, unless it's a granular salt that contains YPS (Yellow Prussiate of Soda), and is allowed to just sit on the pool finish without being stirred around to dissolve. Otherwise, salt is pretty benign, unless you add too much.
The Jack's Magic line of products are stain preventatives. I think you need to look at Sequestering agents, or metal removers, instead of preventative solutions. Getting it out of the water would be better than keeping it suspended, but still there.
Sean Assam
Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com
Bookmarks