+ Reply to Thread
Page 21 of 23 FirstFirst ... 11 19 20 21 22 23 LastLast
Results 201 to 210 of 228

Thread: Clear, but no chlorine???

  1. #201
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Clear, but no chlorine???

    I'll bet you smelled chlorine when your husband went in the pool and when he came out. That's because any impurities on the skin get metabolized and...smell like "chlorine".

    Happens to me all the time. My FC will be solidly where it needs to be, there will be NO "chlorine" smell, I'll just stick my arm in and Bam! "Chlorine Smell"!
    Carl

  2. #202
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Clear, but no chlorine???

    I think it's time to let it drop.

    I haven't tested enough to be certain, but I suspect that, when FC levels are very high, spurious CC levels may appear. If your FC is stable overnight -- and 2 ppm is fairly stable.

    There may be some lingering chlorine demand. However, the best way to deal with it is probably simply to run FC levels equal to 10% - 15% of your CYA for awhile.

    Black ring around the skimmer can be from body oils and lotions OR it can be from plasticizers being released from the liner. If it's plasticizers, there is NOTHING you can do about that, except keep the pH reasonable (between 7 and 8).

  3. #203
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    OK- I just tested this morning @ 6:30am FC=26 CC=1
    Lost 1 ppm FC overnight (27 to 26)

    So if my CYA is 150 then I should let the FC lower to the 15-22 range and keep it there, and not worry about the CC? What if the CC level goes up?
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  4. #204
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Clear, but no chlorine???

    Sounds right.
    If CC goes to 1.5, wait for it to come back down. If it continues climbing - it may take additional action. Let the pool get all the sun it can.

  5. #205
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    Ok- so by wait you mean do not add any bleach, just keep testing and see if CC goes down ( or stays at 1) at lower FC level, yes?
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  6. #206
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Clear, but no chlorine???

    Yes. That's what everyone here has been telling you. Please re-read Ben's last post, above. He's said clearly that you need to let FC drop to 10%-15% of CYA and leave it there.
    So if CYA is 60, FC should be between 6-9ppm. If CYA is 90, FC should be between 9 and 13.5ppm. Etc.

    THEN see what happens to CC.
    Carl

  7. #207
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    got it.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  8. #208
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Clear, but no chlorine???

    Quote Originally Posted by mary jo View Post
    What if the CC level goes up?
    Also, you'll need to avoid focusing on problems you do NOT yet have. Just do the basics, and worry about the other stuff WHEN it becomes a problem; not before.

  9. #209
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Clear, but no chlorine???

    If you had the same storm we did, I hope you had your auto-cover closed! Debris is everywhere. Even my outdoor, heavy furniture was overturned. Large slate slabs on my table were lifted and askew. Wow. How is the pool doing since lowering FC?
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  10. #210
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    Wow indeed- I heard 70 mph winds in the area. Incredibly, we only got a bit of rain, but closed the cover to be on the safe side.

    The FC has been dropping approx. 2 points during the day and 0-1 overnight. The CC has also been dropping!
    Yesterday morning FC=22 CC=0.5.
    Yesterday early evening (5:45pm due to rain) FC=20 CC=0. I double checked using a 25ml water sample to be sure and the FC=20.2 CC=0

    This morning tested @ 8:30 FC=19 CC=0.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

+ Reply to Thread

Similar Threads

  1. Clear Pool but cannot maintain free chlorine level?
    By Mr.Mooks in forum Testing and Adjusting Pool Water Chemistry
    Replies: 12
    Last Post: 07-20-2011, 07:47 PM
  2. high chlorine, but crystal clear!
    By katydid in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-20-2011, 08:14 AM
  3. OK It's clear now what do I need to do?
    By joanie109 in forum Chlorine Alternatives: UV, Ozone, Baquacil (PHMB), etc
    Replies: 8
    Last Post: 08-19-2006, 04:46 PM
  4. Clear solar cover options? Magni Clear?
    By PoBoy in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 07-10-2006, 11:01 AM
  5. Pure and Clear SWG
    By superjet in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 10
    Last Post: 05-23-2006, 11:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts