Test Results are in :(((

[MattinAZ]

Thanks for reply

I am using HTH shock for the time being 56% CalHypo but also ordered 24 lbs Doheny's pool shock 66 % CalHypo. Once I receive it I'll use that product and will report the results.

I'm also having bubbles in the return do you know of a good product to reseal the connections without taking them apart? I wrapped shopping bag and it seemed to slow it

I bought Rectorseal's Tplus2 from HD would that work or what product should be used ? Would appreciate suggestions

Thanks
Matt

[BigDave]

I'm a bit confused about the bubbles. You think you have a leak in the suction side that's bringing air into the pump and filter? Those are hard to find. I've read about people having success finding suction leaks by smearing shaving on the fitting and looking for it to get sucked in. One poster here this year stopped a leak with shaving cream - go figure. if you know a threaded fitting is leaking and you don't want to open it, you could try smearing some non-hardening PVC compatible thread seal on the end you can reach.

[CarlD]

Air could getting in at numerous places, such as a badly sealing pump basket cover, or a leaking multivalve, along with places along the drain lines.

[MattinAZ]

I'm in the process of replacing strainer cover o ring, filter o ring and the filter drain plug o ring, I also suspect one jandy valve so I'll replace it's o rings as we'll. also thanks for the shaving foam trick, I'll definitely give it a try.

Can you give me a few examples (commercial names) for the non hardening PVC compatible seal, local guys at HD are not very, you know, and there are so many different types of caulk.

Looks like I have a nice project for the weekend

Will report once prints are replaced

Thanks
Matt

[BigDave]

Oatey Great Blue pipe thread sealant is one I've used. I believe many people like a Rectorseal product but I haven't used it.

[MattinAZ]

Thanks very much for the sealant brand

Meanwhile after replacing the o-rings especially the Jandy valve o-ring it looks like the air problem is solved. I also need to replace the 6 way valve for the pop ups, ordered one online already.

Now back to shocking to pool to bring the hardness up. By the way HTH shock is leaving a residue making the pool cloudy I'll start running the pump overnight, hope it clears

Thanks
Matt

[BigDave]

You don't need to shock the pool. Just use the Cal-hypo for regular chlorination until you reach CH goal.
What kind of filter do you have?