+ Reply to Thread
Results 1 to 10 of 37

Thread: Test Results are in :(((

Hybrid View

  1. #1
    Join Date
    Sep 2011
    Location
    Southern AZ
    Posts
    13

    Default Re: Test Results are in :(((

    Thanks for all the replies.

    Here is the preparations so far

    - Ordered K-2006 from Amazon - Once I receive the kit ( hopefully this Friday) will retest to compare results with HTH-Walmart machine and put it on this thread.
    - Ordered Filbur Cartridges from Amazon - thanks for heads up @PoolDoc
    - Will rent submersible pump from Rent-All here in Tucson cost $ 27 per day but i'll pick it up on Saturday and return on Monday for the same price, so it is two days effectively. I may as well rent a pressure washer as suggested.

    i'll buy the diChlor. Found it at Sams club (Pool Brand), they sell 24 packs (it says one pouch will treat 10,000 gallons ?) for 58.98. My questions are
    - do I need 24 packs or shall I go for smaller ? if yes what are the commercial names for example does HTH have it ?
    - do you place the contents in the strainer or just throw in the pool ?

    Will get Borax from Local Walmart

    Looks like thats all I need for the start up then if needed I may get the Muratic Acid from HD or Lowes

    Anything else I may need to start up the pool ?


    Here are some pictures



    .
    Last edited by PoolDoc; 08-06-2014 at 04:25 PM. Reason: fix pix

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Test Results are in :(((

    I'd hang on to the dichlor, unless you do a drain and refill. Dichlor adds 9 ppm of stabilizer for every 10 ppm of chlorine.

    Instead dose with PLAIN bleach, at the rate of 2 gallons of PLAIN 8% household bleach for each 10k gallons of water in your pool. Even if you're going to drain, you don't want your pool to get totally swampy. Add 2 gallons EACH evening until you drain, or until the algae is all gone.

+ Reply to Thread

Similar Threads

  1. Test Results...I think!
    By Dw4scoobydoo in forum Pool Chemistry for Intex-type Pools
    Replies: 7
    Last Post: 08-07-2012, 09:29 AM
  2. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  3. Got my kit - 1st test results
    By cantileveredge in forum DPD-FAS based testing
    Replies: 2
    Last Post: 07-17-2006, 09:17 PM
  4. Just got kit - first test results
    By lisak in forum DPD-FAS based testing
    Replies: 0
    Last Post: 07-16-2006, 08:25 PM
  5. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts