+ Reply to Thread
Results 1 to 10 of 37

Thread: Test Results are in :(((

Hybrid View

  1. #1
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: Test Results are in :(((

    First thing is to get the test kit and verify your numbers. If your CYA is really 200 ppm, drain and refill might be the best way to go. There are some on this forum that run high CYA , but around 100 ppm is the highest I've heard.

    Many Home depot locations have a tool rental department. If there is one close to you, they'll rent you a 2" submersible pump and hoses for WAY less than $300 (you might be able to BUY one of their used ones for less than $300).
    http://www6.homedepot.com/tool-truck...ble_2/0009112/

    You might want to drain only 1/2 or 3/4 of the water instead of a complete drain. Then you'll have your CYA and can switch to bleach for your chlorine source.

    Good luck!

    Pappy
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  2. #2
    Join Date
    Aug 2012
    Location
    Gilbert, AZ
    Posts
    45

    Default Re: Test Results are in :(((

    Everyone has already added all the important information as far as getting a good test kit. I had to drain my pool last season and also in AZ. I went to Home Depot and rented the submersible pump as recommended above, they'll give you as much hose as you need for no extra charge as well. I also picked up a cheap power washer from Harbor Freight and sprayed the sides down as the water went down. You can also notify your water company (Town of Gilbert here) and let them know when you refill and they'll cut you a break on water usage. I didn't even notice a difference on my bill when I refilled.
    PebbleTec | 25k Gallons | Purex Triton Whisperflo pump | Magnetek Century Centurion 1.5HP | Hayward Pro Series S311SX Sand Filter | Taylor K-2006 kit

+ Reply to Thread

Similar Threads

  1. Test Results...I think!
    By Dw4scoobydoo in forum Pool Chemistry for Intex-type Pools
    Replies: 7
    Last Post: 08-07-2012, 09:29 AM
  2. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  3. Got my kit - 1st test results
    By cantileveredge in forum DPD-FAS based testing
    Replies: 2
    Last Post: 07-17-2006, 09:17 PM
  4. Just got kit - first test results
    By lisak in forum DPD-FAS based testing
    Replies: 0
    Last Post: 07-16-2006, 08:25 PM
  5. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts