+ Reply to Thread
Results 1 to 10 of 43

Thread: Re-occurring ZOMBIE Algae...

Hybrid View

  1. #1
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Re-occurring ZOMBIE Algae...

    The bottle of Kem-Tek phophate remover I just bought from Amazon is labelled the same as the two I bought in June.

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Re-occurring ZOMBIE Algae...

    OK, good.

    If you have a PO4 test kit, I'd be interested to see how much removal you see for a given dose.

  3. #3
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Re-occurring ZOMBIE Algae...

    The data I have so far is uncomfortably soft. I have the Taylor phosphate kit.

    From the initial supply bought from Amazon in June, I used about (not measured, guessed) one and a half quarts to get from > 1000ppb to 500ppb. At this point, I added 5 days worth of bleach, covered the pool and went on vacation.

    Ten days later I uncovered the pool, FC 12ppm (CYA 60), some appearance of what might be dirt or might be mustard algae in the seams and corners where it usually grows. Allowed FC to come down and maintained 5.5ppm-7.5ppm FC. Added about 1/2 the remainder of the second quart.

    Another ten days or so go by with several thunderstorms bringing tree debris into the pool. Definite return of mustard algae. Brush, vacuum, backflush. PO4 now at 250ppb. No makeup water for the three weeks since PO4 measured 500ppb. Added the remainder of the second quart.

    So, about 8oz of the (June) Kem-Tek phosphate remover took about 250ppb out of my 7700gal pool. If my math is right, that's a whole lot more like 0.75ppm/10,000gal than 2.0ppm/10,000gal as described on the label. This is of course confounded by the storms, debris, high chlorine and time.

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Re-occurring ZOMBIE Algae...

    OK. If you can, keep track of it.

    I'm beginning to think that the ratings are 'ideal', not real. Adding lanthanum chloride to a pool can form lanthanum carbonate -- which is ALSO rather insoluble.

    I believe that, over time, if the lanthanum carbonate remains IN the pool (pool floor or on filter media), it will be converted to lanthanum phosphate. But if you clean the filter before that happens, you'll end up having used a portion of your PO4 remover as an expensive and inefficient way to lower carbonate alkalinity!

  5. #5
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Re-occurring ZOMBIE Algae...

    I let it sit on the filter for a long time (3 weeks) before backwash. I'd think that it should have finished.

    A couple observations:
    It took about three days to clear the cloud with each addition of phosphate remover. That's with the 27" sand filter and moving 40gpm in the sun and 10 gpm all the rest of the time. The cloud was minor, more of a dulling of the pool than a cloud. At night, I could see the beam of a bright, focused flashlight in the water.

    When I added the first and second half-quart doses, the pool water smelled strongly like laundry.

    After every dose the surface tension appeared to change dramatically - the water looked thick and the roil on the surface near the return was far more pronounced.

    I hope to provide better info in August - the beginning of the summer has been crazy for us.

    @PoolDoc: I realize this is now prety for off-topic from the original thread. Sorry. It might be a good idea to move it to the previous PO4 remover thread or make a new one to collect observations.

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Re-occurring ZOMBIE Algae...

    3 weeks should be long enough, if anything is!

  7. #7
    Join Date
    Jul 2014
    Location
    Christmas, FL
    Posts
    31

    Default Re: Re-occurring ZOMBIE Algae...

    HEY!!! You guys hi-jacking my thread!!!? LOL Just kidding, it's ok!!!

    Well... that's a deep subject... LOL... seriously though... my ZOMBIE MUSTARD ALGAE is BAAAAAAAACK.... with a vengeance!!!

    I've been keeping my FC level at 18, and brushing, but I missed brushing night before last and it was BACK BIG TIME!!!

    So I went to Wal-Mart last night and I'm going to keep the FC high... got 9 gallons of bleach...

    Any recommendations since my CYA is 40???

    According to my calculations 16-18 is shock level, so what should be mustard level? I think i need to kick it up to like 25? and maintain that for 3-4 days maybe longer if possible?

    I have not had a chance to hit Home Depot to pickup the chem-tek phosphate remover... it's the other way opposite of my house and Wal-Mart... but no matter, because I still don't have a test... dang test is so expensive...

    I still have not added the borates... need more MA.... I need to get with the program! I was hoping the algae would have been at bay long enough for me to do so.

    I'm going to hit this hard starting Friday!!! One way or another the borates are going in!!! LOL

    Any advice for the rantings of a mad man?
    5.2k gal 16' x 48" Summer Escapes AG, Intex 2650 Sand Filter. PF=23

+ Reply to Thread

Similar Threads

  1. Avoiding Algae / Removing Algae
    By PoolDoc in forum Dealing with Algae & Slime
    Replies: 1
    Last Post: 07-24-2011, 09:40 PM
  2. Cloudy water...then very small amount of algae...then algae bloom
    By Allan in forum Dealing with Algae & Slime
    Replies: 2
    Last Post: 07-12-2011, 09:49 PM
  3. Wanted: Mustard algae or suspected mustard algae
    By gonefishin in forum Dealing with Algae & Slime
    Replies: 28
    Last Post: 08-30-2007, 08:40 PM
  4. Green algae? Mustard algae?
    By AE340B in forum Dealing with Algae & Slime
    Replies: 6
    Last Post: 07-15-2007, 08:32 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts