So I'm pretty much OK, especially considering the water looks fantastic?
So I'm pretty much OK, especially considering the water looks fantastic?
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Your chlorine has dipped a little low a few times. Keep it within the minimum/maximum range based on your CYA and you'll be fine. Otherwise, everything looks fine.
http://pool9.net/cl-cya/
Yes, I've been trying to do that, but suddenly the ability to retain a good level of chlorine stopped, and chlorine has been disappearing a lot faster than before. I added a bit of info from before the 8th of July, when I got my K-2006 kit:
Screen Shot 2014-07-20 at 1.01.57 PM.png
We had a good bit of daily rain from the 9th to the 15th, and somewhere in there I had a filter valve leak where I slowly lost about 1000 gallons. Diluting the pool with fresh water probably had something to do with the change in stability, but I'm not sure what else could have caused it, other than not putting as much chlorine in daily or every other day in that rainy period?
I was using an OTO kit between July 2nd and 8th, and it was VERY dark yellowish every day in that time frame, so the chlorine was holding up well, though I admittedly don't have an very good idea of exactly how much chlorine there was.
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Yep. That'll do it. We see it all the time. Usually it is people who come onto the forum and tell us that the rain caused their algae which isn't the case. Usually it is because people aren't as diligent about keeping tabs on their pool when it rains.
As long as you are aware and watching to keep your chlorine levels in the proper range, you'll be fine.
Hope this helps!![]()
I guess I got complacent over the course of the first 2 weeks of July where it stayed above 3.0 ppm, where I didn't really add too much chlorine except for a 2.5 gallon shock on the 1st, some amount on the 9th (probably a quart or two), and then some before a big pool party on the 12th.
I'll keep a better eye on it now so I don't come back with algae problems in the future!![]()
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
I went back and tracked the weather in the timeframe my FC levels were quite stable, and I think I can conclude 2 things:
1. FC stayed stable because there were a TON of cloudy & partly cloudy days here in the beginning of the month.
2. The chlorine I've been using since the 1st has been some bargain deal chlorine from Menards that was on sale for $1.99/gallon.
I'm guessing that the former helped considerably, but the latter... I think the 12.5% chlorine I've been using lately isn't actually the 12.5% that it's advertised as. I put in 1 gallon earlier today, and it only raised FC up from 2.0 to 4.5 ppm. I added another 2 qts about an hour ago, and will be testing it before I go to bed and then again in the AM, to see if there is anything funny going on.
EDIT: Just checked FC at night before bed, and it's up to 8.0 ppm, which is in line with what you'd expect with 10% chlorine (2.0 to 8.0 via 6 quarts.)
Last edited by mitchryan912; 07-21-2014 at 12:50 AM. Reason: Added FC level of 8.0 at 11:30pm
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
You will definitely use less chlorine on cloudy days. And, I agree with you that 1.5 gallons (6 quarts) would raise your chlorine by about 6ppm if it were 10% sodium hypo. It is pretty typical for many of the bottles of liquid chlorine to not be the strength they are advertised. That will be especially true if they sit on a shelf for awhile in a hot store. That is one reason we like Walmart's generic bleach. They have a fast turnover and the bottles are in an air conditioned store which further slows the break down.
Bookmarks