My patio was just finished around the pool yesterday, and the pool company came back to get rid of any wrinkles in the liner. Apparently they shocked and put algecide in the pool as well. I took my readings today and this is what I have:

pH around 7 so I added 4 doses of borax according to the SS recipe
FC of 6.4
CC of 0 (?)
TA 50
CH 80 (but could be lower since I'm color blind and this one was hard for me to tell, no one was around at the time to ask)
CYA was less than 30

I have the Pool Brand dichlor from Sams that I have been adding nightly since the pool was completely filled for about 3 or 4 days now. I have only been adding one bag, should I increase it to two? Also, the guys who did the patio knocked a lot of dirt and some rocks into the pool. I tried vacuuming most of it out, but need to dive in and get some of the pebbles out as the vacuum didn't have enough suction.

Do I hold off on adding bleach for now until the CYA is up?

Any other advice is appreciated. Thanks