+ Reply to Thread
Results 1 to 10 of 10

Thread: Check Valve Help!

Hybrid View

  1. #1
    Join Date
    Jun 2014
    Location
    News Jersey
    Posts
    8

    Default Re: Check Valve Help!

    Quote Originally Posted by PoolDoc View Post
    The gasket material is very important. Some common rubber materials used with potable water are not at all compatible with the high level of chlorine found in 'leak-back' from a trichlor feeder. Nitrile rubber and neoprene are both common but are not at all resistant to acidic solutions of chlorine. EDPM is much better, but Viton (a fluorocarbon) is best. When I've installed valves in commercial settings, Viton was always my go-to elastomer if it was available. I think that particular check valve does have a Viton O-ring seat (often a weird brown color).


    Anyhow, I'm glad the check valve you had turned out not to be a problem.
    I actually couldnt see any color for the gasket on the new check valve. It was hard to reach my finger all the way in and I know there must be some sort of gasket, but i couldnt see it or feel it. The directions on this valve specifically mention stopping corrosive liquids/gasses, so that gives me hope that it will last some length of time. I'll update in a few weeks to see how it is lasting.

    Hopefully, the FLO valve i used last year that surely failed within a few weeks didn't really mess my filer up too much

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Check Valve Help!

    I don't think the back flow from the feeder would be damaging to most filters.

  3. #3
    Join Date
    Jun 2014
    Location
    News Jersey
    Posts
    8

    Default Re: Check Valve Help!

    Quote Originally Posted by PoolDoc View Post
    I don't think the back flow from the feeder would be damaging to most filters.
    Oh-well then I have to ask-why in the world was it suggested by so many people that I use one if the chlorinated backflow water wouldn't do damage? That's frustrating!

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Check Valve Help!

    It destroys heaters and any equipment with metal such as a gate valve. It would probably damage an SWCG.

    I personally never used check valves when I installed feeders years ago. BUT, in this market pumps usually run 24/7 (afternoon thunderstorms mess pools up on a daily basis), and it wasn't usually an issue.

  5. #5
    Join Date
    Jun 2014
    Location
    News Jersey
    Posts
    8

    Default Re: Check Valve Help!

    Quote Originally Posted by PoolDoc View Post
    It destroys heaters and any equipment with metal such as a gate valve. It would probably damage an SWCG.

    I personally never used check valves when I installed feeders years ago. BUT, in this market pumps usually run 24/7 (afternoon thunderstorms mess pools up on a daily basis), and it wasn't usually an issue.
    SWCG? Whats that

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Check Valve Help!

    Salt Water Chlorine Generator.

    SWG is more common, but those devices do NOT generate salt water, so I kinda banned that term here, among the mods.

+ Reply to Thread

Similar Threads

  1. Check valve question
    By Rockman59 in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-19-2014, 01:56 PM
  2. Rattling Check Valve
    By nomar116 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 04-07-2013, 06:58 PM
  3. Bad Valve or Check Valve?
    By ohpoolboy in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 08-21-2006, 11:09 PM
  4. Check Valve
    By jrv331 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-30-2006, 08:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts