Convert a Summer Escapes / Pro Series pool to use an Intex sand filter & pump

[eblade21]

Thank you so much Pool Doc

The process will begin Saturday, I had order some 2 inch extruded polystyrene for the underside of the pool being it is going on concrete. The plan of attack is to lay the foam down, install the tarp, and begin to assembly the pool. I will post pictures this weekend, i hope i can help someone here one day like everyone has helped me.

[eblade21]

I started the pool, I decided to use Lowes Extruded Polystyrene 3/4 of inch, cut 5 inches completed around my pool with a landscape edging filled with red mulch. See my little helper making the measurements, we will begin erecting the pool Saturday morning, keep you posted.

[eblade21]

Well the pool is full and conversion was successful:

Here are some pics:

[eblade21]

I also including my pics of the vinyl works fence and the red rubber mulch

[eblade21]

Please feel free to ask any questions, I would love to help.

[PoolDoc]

Eddie, at this point in the season you're more likely to see questions on this thread in May 2015, than you are now.

[eblade21]

I was just offering help just in case I know it's late in the season just being nice that's all

Thank you so much