There are so many configurations and some many threads out there, i will be trying to update this as i go.
How to convert a Summer Escapes to either a Intex sand pump filter or Intex Saltwater or the combo system.
For myself I have a Summer Escapes Pro-series 14’ by 42”. Knowing myself I do not like hose clamps, and the plastic ones included in the kit seem very cheap. I am a big fan with screw type connections. That why I choose to have my system to be all 1.5 inch hosing with screw connection. I also do not like 1.25 to 1.5 inch, I know it is not a big deal as some of you guys say; this is just a preference of mine. I figure now with a bigger pump I like to have everything at 1.5 inch and make sure flow doesn’t travel from 1.25 inch to 1.5 inch.
The system I am using:
Intex 12 inch Sand Pump Filter 28645EG
Intex Krystal Clear Saltwater System CG-26883
For this you will need the following parts:
1. The system of your choosing
2. Intex 2 Plunger valves (P/N 10747E) $12.24
3. Intex Strainer and Nozzle (P/N 11704) $15.72
Steps:
Disassemble
1. Drain your pool till you are below the diverter and the skimmer.
2. Remove the diverter valve.
3. Remove the summer escapes skimmer and all internal parts of the skimmer (Basket, filter etc.)
4. Remove the filter pump.
Assemble
1. With a 2.5 inch hole saw begin to remove the bottom of the skimmer
2. After modification of the hole, you must carefully remove the material outside the bottom of the skimmer. PLEASE BE CAREFUL NOT TO CUT THE DRAIN.
3. Install the Intex strainer on bottom of skimmer where the modification to the skimmer was made, you will not need the intex strainer grid it is your option to use or not, the summer escape basket works just fine.
4. Install the summer escapes basket into skimmer
5. Install one plunger valve to the strainer (check for leaks)
6. Re-install the skimmer to the pool according to summer escapes manual
7. Where the diverter valve was removed you will need to enlarge the hole to install the intex nozzle on a summer escapes pool. (I use a xacto knife and took my time)
8. Upon modification install the nozzle to the pool
9. Install one plunger valve to the nozzle (check for leaks)
10. Here is the beauty now just screw in all your hoses and you are done.
Follow all the instructions of the intex sand filter pump and intex krystal saltwater
I would keep you updated on the progress. Feel free to ask any questions.
I really hope this helps
Bookmarks