Hi All,

I'm a newbie to pools in general. I found this forum while researching an above ground pool for my kids. I'm glad I did. I did by an 8' x 12' above ground pool. I have installed it and am waiting for the pump and filter to arrive to finish the install and fill up the pool. I bought the hayward models spec'd as good for most above ground pools....22" sand filter and 1/2 hp pump.

I am so new, I don't even know what I don't know, so I'm just going to ask, where to begin? I read the 7 day Intex startup, is that a good guide for my setup? I want to start off on the right foot. I filled out the form, but here are the particulars:

8x12 pool - 46" deep at water level when filled...which by my math is roughly 2900 gallons.
Vinyl liner
Pool will get about 11 hours of direct sunlight in the summer months.
I have ordered the K-2006 testing kit

How do I get started and keep this clean and healthy? What equipment will I need - I saw the list on the 7 day Intex startup as far as what to buy before filling....bleach, borax, pool brush, pole, leaf rake, etc. Anything I'm missing?

I really do appreciate all the help here.