Results 1 to 4 of 4

Thread: New to Pools and trying to figure this all out

Threaded View

  1. 06-03-2014 10:39 PM #3
    Elisabeth
    Elisabeth is offline Established User Elisabeth 0
    Join Date
    Jun 2014
    Location
    Ontario, Canada
    Posts
    8

    Default Re: New to Pools and trying to figure this all out

    First thing we are trying to figure out is the best base, should we remove the sod? Use sand or ground limestone and should we put pads undrr the legs?
    We purchased a 14x42 Sunscape Proseries....mixed emotions as I can find both good and bad comments about this pool.
    Last edited by PoolDoc; 06-06-2014 at 12:08 PM. Reason: enable signature
    3,300 gal, 14x42 AG soft side pool.
    Reply With Quote Reply With Quote
« New gal with new 5k gal 15' pool | New Intex pool owner from Michigan »

Similar Threads

  1. Trying to figure out which contacts to clean...
    By Cothran3 in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-29-2013, 10:12 PM
  2. Trying to figure out the brand of pool I have.
    By Siebs in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 05-19-2012, 04:21 PM
  3. PPM --- How do I figure IT
    By Cloud26 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 17
    Last Post: 07-13-2011, 01:25 PM
  4. HELP! I can't figure this out!
    By howbout in forum Dealing with Algae & Slime
    Replies: 5
    Last Post: 05-08-2007, 11:09 AM
  5. can't figure it out - where/when antifreeze
    By pairadocs in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 0
    Last Post: 09-17-2006, 11:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules