+ Reply to Thread
Results 1 to 10 of 29

Thread: Chlorine question for Intex 22'x 52" pool

Hybrid View

  1. #1
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    This chart can help you decipher colors higher than what your chlorine test (OTO) can show: http://pool9.net/oto-chart/ After you look at the chart, let us know what you think your chlorine level is.

    The directions for your 6-Way kit: http://www.archchemicals.com/Fed/HTH...structions.pdf Let me know if you have more questions about the CYA test after you look at that link.

    You don't have a high enough CYA level to bother with testing it yet.

  2. #2
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    I believe it matches the 5 ppm on the tester, and not higher than that as of this morning. It's definitely not the color of anything on the chart you sent me the link to

    Should I put more dichlor in tonight??

    Thanks again,
    Jewlz

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    Maybe put in a half a dose and then try and run the chlorine test within an hour of sunrise tomorrow before any of it is lost to the sun. That way, it will help you figure out how much chlorine was added and you can use that info to adjust future dichlor doses if needed.

  4. #4
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Ok thanks, I put in 1/2 dose of the dichlor and borax as well. We will be having rain AGAIN tomorrow as we have had for the last several days. I'm sure since the sun hasn't been out, the chlorine isn't burning off as fast. I'll see what it's like tomorrow morning.

    How soon until I can get a CYA reading? And in the meantime is the pool safe to swim in if the chlorine level reads over 3 ppm? At least until I can get a good CYA reading?

    Thanks,
    Julie

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    Even if it rains, be sure you get out there and check your pool! Many people think that rains brings algae issues. In actuality, it is not the fault of the rain but due to nobody wanting to get wet and go out and check chemistry!

    I'd wait until you have been using dichlor for a week to ten days before testing. You can kinda judge how much CYA is being added; for every 10ppm of chlorine that dichlor adds, it also adds 9ppm of CYA.

    It is still safe to swim if the chlorine is a little high. Skin is pretty resilient, swim wear not so much. So, have the kids wear old swimsuits.

    Report your chlorine level in the morning.

  6. #6
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Thanks. I have checked my pool water every single day since it was full, even in the rain. I just want to make sure I don't have any issues at all with the water. It is still clear and I can kind of smell the chlorine smell now since I"ve been using the dichlor.

    It's supposed to rain again today I think. The sun was out a minute ago but it hiding once again behind the clouds.

    Thanks for all your help once again!
    Julie

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

+ Reply to Thread

Similar Threads

  1. Help. Correcting zero chlorine level & some foam in Intex type pool after dust storm
    By h20pup in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 07-03-2013, 11:16 AM
  2. Intex pool question
    By piedmontpool in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 07-20-2012, 08:07 PM
  3. Intex 18ft 48 deep pool question on chemicals
    By Sin2001 in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 07-19-2012, 09:10 PM
  4. Salt Water Generator / Intex Pool Question/advice
    By Indywar in forum Pool Chemistry for Intex-type Pools
    Replies: 13
    Last Post: 07-05-2012, 01:16 PM
  5. Intex Pool 18 x 48 a general question
    By reboot530 in forum Intex-type Pool Setup & Operations
    Replies: 8
    Last Post: 06-27-2012, 04:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts