New AGP Install

[DiamondAir]

Thanks for the reply.

Yes I do know what you mean about youtube. I looked at those 2 videos seen one. I pretty much did what i did based on videos and instructions only thing I didnt do was make sure i got the liner over the top far enough. Makes me nervous not being out much and being my first pool like this. The shop vac is something new i didnt use yet.

Going to give that a try later today and see how that goes.

[PoolDoc]

Maybe you can help us help the next guy with this question!

[DiamondAir]

Indeed I did figure out the trick. Once it was filled the air was captured at top. I went back and pulled a few of the support rails off and pulled the liner up. No air bubbles now. Now just got leak at the skimmer bottom at wall and around the jet.

[PoolDoc]

Great!

[DiamondAir]

Question. Will it hurt to drop a small bead of 100% silicone around the gaskets on the skimmer and return jets? Where the skimmer and return jet meet the Liner? I would not see why but not sure with the chemical reaction on the liner.

[Watermom]

That is ok to do. Silicone is inert. I have it around my skimmer and I think on my return, too. It doesn't stick to well to vinyl but it does form a good seal.