I'm glad we were able to help!
I'm glad we were able to help!
We are having a great summer with the pool. It looks great and is crystal sparkly clear.
Ph is up to 7.8. I have some muratic acid but not sure what volume to start adding. Do I start by the cup or do I add by the liter?
Thanks!
18k gal AG 27' with 5-1/2' deep end, Hayward XStream 1500 Cartridge filter; Hayward 1.5 hp Power Flo matrix pump; K-2006C kit; 2 bottom drains. PF=6.7
You don't want to actually measure muriatic acid as it is too likely to splash on you. Just estimate your dose. I'd probably do about a quart and then after awhile, retest and redose if needed. Please read the info at the following link about using it safely.
http://pool9.net/ma/
Since we don't know your TA, add approximately a pint - 1/8 of a gallon jug. Don't measure, just guesstimate.
Wait a day, and retest.
PoolDoc / Ben
Bookmarks