Results 1 to 10 of 23

Thread: A quick SWCG question

Threaded View

  1. #14
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: A quick SWCG question

    Since you added stabilizer, you may not need dichlor, which adds stabilizer. Add 2 cups of 8.25% generic bleach, no fancy smellygoodie, or other "goo", every evening until you get 5ppm reading with an OTO drops based test kit. "Guess strips" are not reliable. If you are able to the HTH 6 Way kit you can check your stabilizer level. Your final chlorine level depends on the stabilizer level. If the HTH 6 way isn't available, get the cheapest OTO kit you can.

    http://poolsolutions.com/gd/best-gue...ine-chart.html


    I meant to say 2 cups bleach for every 3000 gallons.
    Last edited by Pappy; 05-26-2014 at 07:01 PM.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

Similar Threads

  1. Quick question about swimming with 1.5 CC
    By JuJuBee in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 05-26-2012, 08:14 PM
  2. quick leveling question...
    By badutahboy in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 05-17-2007, 06:56 AM
  3. Quick CYA question
    By doggie in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-15-2007, 01:15 PM
  4. Quick Question ???
    By IMherDad in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 04-25-2007, 02:57 AM
  5. quick question-closing now
    By poolhelp101 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 10
    Last Post: 10-16-2006, 07:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts