Thank you. I am installing the surge protectors. I believe i will only need four, one for SWG and one for each pool pump, and one for the lights. My motor repairs thus far have been seal and bearing related not electrical. My electrical failures are my LED lights which worked until i flicked the circuit breaker several times trying to start my stuck main motor, during one of those energizes, my lights flashed then stopped working and my VSP control unit (which most likely was a lighting strike since i don't have the surge suppressors on. I have an electrician coming to do some metering tests on the pool equipment. For the 12 years we lived at the property, we've had excellent electric service with virtually no electronics getting fried other than the VSD Controller. Please know my pool is open and running just very loudly.