Thank you.. Is it still okay to use the same power box I have or would I have to change that out as well..
Do you recommend running it on 40% as opposed to the 60% I was running it on with the CL20
Re: Pentair intellichlor
Thank you.. Is it still okay to use the same power box I have or would I have to change that out as well..
Do you recommend running it on 40% as opposed to the 60% I was running it on with the CL20
Re: Pentair intellichlor
To get the same chlorine level, you should run the 40 1/2 as much as the 20 because it generates twice the chlorine. So if you were running 60% and you have the correct chlorine level, then 30% should be sufficient.
The power box should support both cells but check the manual first.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Re: Pentair intellichlor
Pentair only has one power center for their IC series. It works OK with the 2 smaller units, but tends to overheat with the IC-60. I have a box fan resting in front of a bank of for power centers driving 4 IC-60 units . . . and the things still get hot.
PoolDoc / Ben
Posting Permissions
Reply With Quote
Bookmarks