+ Reply to Thread
Results 1 to 10 of 70

Thread: Installing a new Intex AGP with saltwater chlorination.

Hybrid View

  1. #1
    Join Date
    Aug 2013
    Location
    Massachusetts
    Posts
    32

    Default Re: New INtex AGP with saltwater...

    Sounds good, thank you! Yes, I was wondering if it was worth starting up the SWCG now to assist with the chlorine, or wait until the chlorine level has stabilized along with the CYA together, and then start using it? Looks like I only have a couple of CYA test in my kit.........do they sell individual CYA testing kit?

  2. #2
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New INtex AGP with saltwater...

    Do you know how much dichlor you've used(easy if it came in 1lb bags)? We could calculate approximate CYA added by dichlor if we knew. No need to test CYA every day, as you know there are very few tests in the kit.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  3. #3
    Join Date
    Aug 2013
    Location
    Massachusetts
    Posts
    32

    Default Re: New INtex AGP with saltwater...

    Yes I have used 1 dose, which for 4400 gallons is 3/4 cup, and I have also added equal part (3/4 cup) Borax at same time the last 2 nights. My wife picked up a salt stick test kit today also. Tested that and it came up around 5.4 reading which on this test kit equals 1960ppm.

    I understand that the CYA will take a little while to up itself with this being a fresh fill only 2 days ago.

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New INtex AGP with saltwater...

    To answer another of your questions above, yes, you can just buy CYA reagent. That is one that runs out quickly. It is R-0013 and if you click on the test kit link in my signature, you'll find the link to be able to order it at Amazon.

  5. #5
    Join Date
    Aug 2013
    Location
    Massachusetts
    Posts
    32

    Default Re: New INtex AGP with saltwater...

    Tested CL and pH this am before leaving for work and got this:
    CL=orange color....guessing above 20ppm?
    pH=7.5

    Assuming the 3/4 cup dichlor and 3/4 cup borax nightly has obviously raised chlorine levels. Will test again tonight, run pump again for another 6 hrs overnight. I am thinking of skipping tonight dichlor/borax dump in, and to see how much the chlorine will drop in a 24 hr period. Will then check again tomorrow morning as well as, I will now turn on the SWCG nightly and see what readings will be running that.

    **Once levels are all stable, should I add anything nightly to maintain? Smaller amounts of dichlor/borax, bleach,ect?
    Thanks for info, I have told my wife I am hell-bent on preventing any weird color bloom in the water if possible! haha!
    Last edited by PoolDoc; 05-21-2014 at 11:47 AM.
    4.5k gal 15 x 48 Intex pool; PF=26

  6. #6
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New INtex AGP with saltwater...

    If the OTO is orange this evening, skip tonight's dose.

    I could be way off, but I think 3/4C of dichlor should be between 9 and 12oz. If it is, in 4400 gallons, it will raise CYA 8-10 for each dose. Once you've used 5 doses, test CYA again.

    After the CYA is about 50, you might consider using bleach for daily (nightly) chlorination. If the dichlor is bagged, use up any open bags before switching.

    "Nightly to maintain": Test FC, CC, and pH nightly. Add enough chlorine so that the FC is at or above the minimum on the Best Guess chart when you test the next evening.

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Installing a new Intex AGP with saltwater chlorination.

    . . . membership upgraded. Cool thread!

    Do you have pictures I can post? (poolforum@gmail.com) Or you can post them, using Photobucket or whatever.

+ Reply to Thread

Similar Threads

  1. Intex saltwater with sand filter
    By bbranen in forum Intex-type Pool Setup & Operations
    Replies: 3
    Last Post: 05-08-2014, 06:52 AM
  2. Winterizing Intex Saltwater Pool
    By vicsin in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 10-06-2013, 04:07 PM
  3. Intex Saltwater Chlorinator issues
    By squeegeatc in forum --cleanup--
    Replies: 0
    Last Post: 05-20-2013, 07:19 AM
  4. Intex saltwater system
    By LeeDavenport in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 05-31-2011, 06:31 PM
  5. Intex saltwater system
    By chasamp in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 05-31-2010, 09:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts