+ Reply to Thread
Results 1 to 10 of 25

Thread: pH above 8 15ft X 48in Intex

Hybrid View

  1. #1
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    I assume this is NOT the kind of DE to use as a filter aid.

    http://www.homedepot.com/p/Safer-Bra...1702/202743025
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    Good assumption. There are different grades, and I have no idea if that one would be OK or not. Some grades definitely would NOT be OK.

  3. #3
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    No more green! Kept FC between 5 and 15 for little over 24 hrs. Checked it every hour or so, when it got close to 5 (max for my kit), I'd brush the whole pool and dump half a jug of bleach which should have jacked the FC to around 15. The pool is cloudy blue now, as I expected. I got this
    http://www.walmart.com/ip/HTH-D.E-Fi...10-lb/20434370 (the picture is wrong, description is correct) and put 1/4 cup in my filter. Many of the local Walmarts stock it. Had to backflush after about 30 minutes. About 1/8 cup is seems to be plenty for my filter. After I get the water cleared up, I'll add CYA til it gets to about 40 and we'll be set.

    Thanks a ZILLION!
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    How did you conclude that you needed to backwash for 30 minutes?

  5. #5
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    I didn't. The filter stopped up about 30 minutes after I added the DE. I backwashed til the discharge water was clear.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    OK, I understand.

    The short filter runs result from the DE catching stuff in the water.

+ Reply to Thread

Similar Threads

  1. 15ft Round pool with 1.5hp pump
    By Jpc2003 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 05-12-2014, 06:31 PM
  2. Intex 18 x54
    By witherig in forum Intex-type Pool Setup & Operations
    Replies: 2
    Last Post: 04-13-2014, 11:29 AM
  3. Replies: 1
    Last Post: 05-26-2013, 09:38 AM
  4. New intex 15 x 42 with swg
    By jnypeterson in forum Pool Chemistry for Intex-type Pools
    Replies: 1
    Last Post: 07-29-2012, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts