+ Reply to Thread
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 25

Thread: pH above 8 15ft X 48in Intex

  1. #11
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    Very interesting -- thanks for the link. I had no idea they were doing that.

    Keep in mind that Kem-Tek's product costs 35% less -- $17.99 vs $27.98 -- so if you buy ahead, you can save quite a bit.

  2. #12
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    Is a quarter cup of 99% CYA a reasonable place to start if there is none in 4500 gallons? pH8+?
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  3. #13
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    CYA is about 2# / quart. 1 lb will add about 20 ppm to your pool.

    So, no, that's not enough. Put about 2 cups in an old sock, and hang it in front of the return.

  4. #14
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    Why not pour it in the skimmer and let it sit in the sand filter til it disolves? I need to wait a week between doses don't I?
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  5. #15
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    Most people have to backwash their pool frequently when they start it up -- and end up losing their CYA. If you're sure you want need to do so, go ahead.

  6. #16
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    Added 121 oz 8.25 bleach to the pool at sundown. Just checked cl. I'm getting 2 or a little more FC and 5 CC. My pH is as I suspected, probably astronomical. I added 4 drops of the red stuff instead of 5, so it should have shown a lower pH than actual. Still LOOKED like 8.2. I gave it another jug of bleach.

    I guess the plan is go get the CYA tomorrow after I confirm my theory that FC will be zero and CC will be who knows where. Stick some in the pool to get the pH to a measurable point. If I understand correctly, the CYA actually inhibits the effectiveness of the chlorine so it is desirable to keep CYA low til the pool is stable overnight.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  7. #17
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    With which test kit are you testing?

  8. #18
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    We currently have a "Pool Shop basic 5 test kit" from Home Depot. It is the drops but reads only to 5ppm chlorine. It says FC is what you see between 2 and 3 seconds and CC is >2 minutes. I'm going to wally world today to get the HTH kit so I can monitor CYA levels.

    We got about 1-1/2" of rain last night and this morning the pH showed 7 - 7.2??? Can rain bring pH down that much? FC was in the 2-3 range. It's supposed to be cloudy today, should I dump another jug or wait til evening.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  9. #19
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: pH above 8 15ft X 48in Intex

    Rain can have a low pH; whether it can lower the pH in your pool depends on the buffer level (total alkalinity). it's also possible the rain has not mixed with the rest of the pool. I'd wait & retest before trying to adjust the pH

  10. #20
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: pH above 8 15ft X 48in Intex

    I assume this is NOT the kind of DE to use as a filter aid.

    http://www.homedepot.com/p/Safer-Bra...1702/202743025
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

+ Reply to Thread

Similar Threads

  1. 15ft Round pool with 1.5hp pump
    By Jpc2003 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 05-12-2014, 06:31 PM
  2. Intex 18 x54
    By witherig in forum Intex-type Pool Setup & Operations
    Replies: 2
    Last Post: 04-13-2014, 11:29 AM
  3. Replies: 1
    Last Post: 05-26-2013, 09:38 AM
  4. New intex 15 x 42 with swg
    By jnypeterson in forum Pool Chemistry for Intex-type Pools
    Replies: 1
    Last Post: 07-29-2012, 07:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts