I'm a little leery to comment on such a big pool, but generally what these numbers mean is:

pH of 8.0 is too high and you should add Muriatic Acid to bring it down. I'd suggest to 7.0 or 7.1 because of the high TA level.

TA is 160 which for a concrete pool with a high pH and high CH level is too high. Therefore I'd suggest our ratcheting down method of lowering TA. Lower pH with acid which lowers TA as well, aerate to raise pH without re-raising TA. Repeat until TA is between 80 and 120.

CH is a bit too high -- 400 is generally the recommended upper limit for concrete pools. But with a few backwashes it will come down. Do NOT use Cal-Hypo anymore or add calcium since CH is 440.

CYA is generally fine at 40. FC should be maintained at 3-6ppm, shock at 15ppm

FC: too low
CC: too high.

Ben will give you better and more detailed recommendations and make any corrections he deems appropriate.