+ Reply to Thread
Results 1 to 4 of 4

Thread: Variable Speed Pump Replacement

Hybrid View

  1. #1
    Join Date
    May 2014
    Location
    PA
    Posts
    4

    Default Re: Variable Speed Pump Replacement

    Thank you. It is a Hayward Swim and Clear 550 SF Cartridge Filter. They "threw" the ozonator in. I don't run it much at all since I have an automatic pool cover and i know the ozone can deteriorate the cover threads. Surge Protection? It would have been for the pool builders to suggest that. I'll have to look into that right away.
    40k gal 22x45 gunite rectangular pool; Hayward Phantom cleaner, Hayward cartridge filter, ozone system, SWCG. PF=3

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Variable Speed Pump Replacement

    Yeah, we agree with the "throwing" part, about ozonators; we just differ with your builder about where they should be 'thrown'!

    A 550sft filter is much more in line with your pool's size. Just to verify, you have the C5030 shown here: http://www.hayward-pool.com/prd/In-G...1_14001__I.htm ?

    Regarding equipment, the consensus here is that either the AutoPilot or Goldline (Hayward) SWCG's are to be preferred. I'm not sure that we have enough info to chose between the Hayward and Pentair VS pumps, other than recommend surge protection . . . LOTS of surge protection. Intermatic has come out with a protector that is listed for pools and spas, unlike many of industrial protectors:
    Intermatic PS3000 Pool and Spa Surge Protective Device
    I had tried to find some appropriate protectors, but kept running into "I'm not sure; I'll check and get back to you" when I asked if a particular protector was listed for pools. This one is, and comes with a $7,500 warranty on protected equipment. BUT, I have not yet read the warranty, which I'm sure has lots of 'weasel' language: I wouldn't expect to cover more than 1/2 the cost of replacement via the warranty. But, hopefully, if you install 1 or 2 of these, you won't need the warranty. (The protectors themselves are NOT warrantied but are rather intended to 'die first'.)

+ Reply to Thread

Similar Threads

  1. New variable speed pump loosing prime at low speed
    By lucas2 in forum Pool Equipment & Operations
    Replies: 13
    Last Post: 07-23-2013, 10:09 PM
  2. If you run a variable-speed pump at half-speed, does the turnover rate double?
    By famousdavis in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 07-25-2012, 12:22 PM
  3. what speed on a variable pump?
    By bomberchamp in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 04-11-2012, 10:53 AM
  4. variable speed pump
    By bradc344 in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 01-16-2012, 08:18 AM
  5. Variable speed pump upgrade
    By kmh in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 10-17-2011, 07:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts