How can I remove the dead algae from an Intex 15' X 48"

[Pappy]

We are under water restrictions which prohibit drain and refill of pools, so that's not an option. There is a good bit of algae in the bottom of the pool now and I know that I don't want to fight with this all summer. We have the cartridge filter that came with the pool and it will never filter out all the stuff. What is a good pump/sand filter to replace the Intex cartridge? I know there has to be a LOT of us in North Texas affected by this, and I'm willing to bet I'm not the only one with an algae problem.

Thanks

Pappy

[CarlD]

What you NEED to do is kill the algae first, then vacuum it out. That means lots of bleach. 1 gallon of 8.25% to keep your chlorine level at 15ppm may well do it. Each gallon of 8.25% will add about 15 or 16ppm of free chlorine to your pool.
Once you do that, you want to vacuum it out. I used to use a 1.25" vacuum hose with a 3/4" PVC double female connector in the hose as an adapter to the Intex drain, but you'll have to wash the filter medium a lot to get all the algae. Alternative, you can get a Pool Blaster (expensive-$300) but they are rechargeable and last for years, and won't use any water. Get the smallest.

[Pappy]

We are bleaching the algae, we just were never able to get all the debris out.

After cleaning it up, the next day there would be stuff sitting on the bottom again. Killing the algae isn't the problem, the problem is cleaning the dead algae out of the pool.

[Pappy]

We pulled the trigger on an Intex 14 inch sand filter, that came in today, but I didn't order the "plunger valves". What do those do and are they necessary?

======================

The model # of the filter is SF70110.

[PoolDoc]

Getting the dead algae out of the soft-side pools is a problem, because the pools are not supplied with the gear to do so. Here are some options:

1. Leave the algae there.
Once the algae is dead, it's not really a problem. But if you continue to use the pool, the algae will be stirred up during use, and some will be filtered.

2. Set up a vac hose, vac head, and pole, and manually vacuum the algae to the filter. Getting better cartridges will help a lot. See the Super Simple Recipe for soft-side pools, for links and more: http://pool9.net/ssr/

It's also possible to use a head + pole + hose to siphon vac a pool, but of course doing so wastes a lot of water.

3. Get a battery vac:

Water Tech Pool Blaster Max
Water Tech CATFISHPPV Pool Blaster, Catfish
Pool Blaster PBW022MF Micro Filter Bag

If you are interested in the battery vac -- and we've had pretty good reports on this brand -- call Water Tech *FIRST* and make sure that the fine bag will pick up debris like yours. It's possible that it may just go through the bag, so ask first.
Water Tech (PowerBlaster Max page)
10 Alvin Ct. Suite 111
East Brunswick, NJ 08816 USA
Tel: (800) 298-8800
e-mail: CustomerService@WaterTechCorp.com

[Pappy]

I "thought" that a .5 hp pump coupled to a 14" filter was ordered. Turns out that the pump is .75 hp. and still a 14" filter that takes somewhere between 50 and 100 lbs of sand. My first inclination is to throttle the intake to slow the flow through the filter sand and lower overall pressure. Would it be better to throttle the exhaust and increase pressure? I'm not happy with either option, I think it will make the pump work harder either way. I do think I'm less likely to break something if I restrict the intake. Am I worried about nothing important?

[Pappy]

I just ordered new style plunger valves from Intex. $7.12 each and $7.60 shipping. I hope they work.

Thanks again for all the help!

[PoolDoc]

Let us know!

[Pappy]

The old style plunger valves were slide valves. The new ones look to me like a 90 degree, 1/4 turn ball valve, they are SOME? kind of rotary valve. What ball valve would you recommend?

[Pappy]

With this
http://www.amazon.com/Intex-Fitting-...andard+1-1%2F2