Results 1 to 6 of 6

Thread: Removing blown in sand from pool

Threaded View

  1. #4
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Sand in Pool

    I'm going to step up and say there's a better solution: That is a garden-hose drive vacuum like the black magic:
    Poolmaster 28008 Black Magic Pool Jet Vacuum
    I think Bioguard used to make a similar one. But here's a similar one to the Black Magic:
    Ocean Blue Water Products 130055B Standard Jet Vacuum
    Or, if you want a permanent investment, you could get a Pool Blaster rechargeable vacuum. It will be more expensive, but you'll use it for years after...I'm on my second.

    Both options should pick up the sand without damaging anything. The Black Magic is basically a venturi with a catch-bag and the Pool Blaster's like a Dust buster where the bag is in front of the motor.

    I like the idea of trying the Jet Vac head because they don't cost much, and ADD water via a garden hose rather than drain it, as a syphon would.

    Ironically, the pressure-side cleaners like the Polaris work the same way--using the return pressure. However, you do NOT want that sand getting into the pump and filter.
    Last edited by PoolDoc; 05-02-2014 at 08:04 AM. Reason: fix links
    Carl

Similar Threads

  1. What should we do for blown in pool cover?
    By MaureenCab in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 11-25-2013, 06:05 PM
  2. Wind blown dust -- Intex pool Cover ?
    By Jamiel13579 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 1
    Last Post: 08-23-2013, 05:58 PM
  3. Waterco F600 top mount multiport valve sand filter - removing the valve
    By wojie24 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 10-29-2011, 10:41 PM
  4. Removing sand from pool (from filter)
    By etroisi in forum In-Ground Pool Construction and Repair
    Replies: 5
    Last Post: 06-01-2011, 03:25 PM
  5. removing beaded liner to straighten sand
    By fullhouse in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 08-24-2006, 10:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts