I'm a newbie so I can only post here. Hope to get some help from the experienced pool owners.

I don't have any suction at all from the skimmer but the sweeper works fine when I turn everything on, the pump still makes noise so I assume it's still working. There's air from the inlet into the pool on and off (not all the time).The water is turning green right now :-(

I searched through the internet and opened the pump cover but there's barely any debris. When I closed the cover and restarted the bump, there was about ten seconds I saw suction from the skimmer but that was it! Didn't work afterwards for a second even when I repeated the same process. I also have a drain king on the way..

I was away due to emergency matters and didn't have anyone check the pool for a few weeks. When I got back the water level was low (below the skimmer line) while the pump was set up to run automatically every day, I'm not sure if that may cause the issue.

Please any help is appreciated!